MCD-4008 MK2 - Receiver Omnitronic - Free user manual and instructions
Find the device manual for free MCD-4008 MK2 Omnitronic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Audio Receiver |
| Brand | Omnitronic |
| Model | MCD-4008 MK2 |
| Dimensions (W x H x D) | 483 x 88 x 280 mm (19", 2U) |
| Weight | Approx. 5.0 kg |
| Power Supply | AC 230 V / 50 Hz |
| Power Consumption | 50 W (max) |
| Number of Channels | 8 |
| Inputs | 8 x XLR/TRS combo, 2 x RCA |
| Outputs | 2 x XLR main, 2 x XLR zone, 1 x Headphone |
| Frequency Response | 20 Hz - 20 kHz |
| Total Harmonic Distortion | < 0.05% |
| Signal-to-Noise Ratio | > 90 dB |
| Phantom Power | +48 V, switchable per channel |
| Cooling | Fan-assisted, temperature-controlled |
| Main Functions | Mixing, EQ, effects (reverb/delay), Bluetooth streaming, USB playback |
| Maintenance | Clean with dry cloth; avoid liquids; check ventilation yearly |
| Safety | Overload protection, short-circuit protection, grounded power cord |
| Spare Parts & Repairability | Replacement fuses, power supply, potentiometers; service by qualified personnel |
| General Information | Rack-mountable, rugged steel chassis, LED indicators |
Frequently Asked Questions - MCD-4008 MK2 Omnitronic
How do I connect speakers to the MCD-4008 MK2?
Use the main XLR outputs on the rear panel. Ensure speakers are powered or use an external amplifier if passive.
Can I use this receiver with a computer?
Yes, via the USB port for playback or Bluetooth streaming. For recording, connect computer audio output to RCA inputs.
How do I enable phantom power for condenser microphones?
Press the +48V button on the corresponding channel strip. Avoid plugging dynamic mics while phantom power is active.
What should I do if the receiver overheats?
Ensure proper ventilation. Check that the fan is not blocked. Reduce signal levels and allow the device to cool before continued use.
How do I reset the device to factory settings?
Power off the unit, press and hold the 'Menu' button, then power on. Continue holding until 'Factory Reset' appears.
Can I use Bluetooth to stream audio?
Yes, press the 'Bluetooth' button on the front panel. Pair your device from the Bluetooth menu. The receiver supports A2DP.
Why is there no sound from Zone outputs?
Check that the Zone output is not muted. Go to the menu and verify the Zone routing settings. Also check cable connections.
How do I update firmware?
Download the latest firmware from the Omnitronic website. Connect via USB to a computer and follow the update instructions in the manual.
What type of fuse does the receiver use?
The MCD-4008 MK2 uses a 5x20 mm, 250 V, 2 A slow-blow fuse. Always replace with the same rating.
Can I daisy-chain multiple receivers?
Yes, using the Link output (XLR) to connect to the next unit's input. Ensure total impedance is within limits.
User questions about MCD-4008 MK2 Omnitronic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual MCD-4008 MK2 - Omnitronic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MCD-4008 MK2 by Omnitronic.
USER MANUAL MCD-4008 MK2 Omnitronic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Omnitronic
Model : MCD-4008 MK2
Category : Receiver