PAD-12 - DJ Equipment Omnitronic - Free user manual and instructions
Find the device manual for free PAD-12 Omnitronic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | DJ Controller/Mixer |
| Model | PAD-12 |
| Brand | Omnitronic |
| Dimensions (approximate) | 48 x 32 x 5 cm (18.9 x 12.6 x 2.0 in) |
| Weight | 3.5 kg (7.7 lbs) |
| Power Supply | DC 12V 1.5A (adapter included) |
| Power Consumption | 15 W |
| Number of Channels | 12 |
| Audio Outputs | 2 x RCA, 1 x XLR (balanced), 1 x 6.3 mm jack |
| Audio Inputs | 4 x RCA, 2 x 6.3 mm jack |
| USB Port | 1 x USB Type-B for PC/Mac connection |
| MIDI Control | Yes (USB MIDI, class compliant) |
| Pads | 12 velocity-sensitive RGB pads |
| Faders | 12 channel faders, 1 crossfader |
| Equalizer | 3-band EQ per channel (High, Mid, Low) |
| Effects | Built-in effects: reverb, delay, flanger |
| Sample Rate | 44.1 kHz / 16-bit |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | > 90 dB |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Cleaning | Wipe with a dry, lint-free cloth. Do not use solvents. |
| Safety | Use only the supplied power adapter. Avoid moisture and extreme temperatures. |
| Spare Parts & Repair | Contact Omnitronic support or authorized service centers. Faders and knobs are replaceable. |
| Warranty | 2 years (manufacturer warranty) |
Frequently Asked Questions - PAD-12 Omnitronic
How do I connect the PAD-12 to my computer?
Use the USB Type-B port on the rear panel with a standard USB cable. The device is class-compliant and should be recognized automatically. For DJ software, select 'Omnitronic PAD-12' as the MIDI device.
Can I use the PAD-12 without a computer?
Yes, it can be used as a standalone mixer with analog audio inputs and outputs. However, the pads and effects may require a computer for full functionality.
What is the maximum number of channels?
The PAD-12 features 12 channel faders and corresponding inputs, though not all may be available simultaneously. Refer to the manual for input routing.
How do I update the firmware?
Firmware updates are available on the Omnitronic website. Download the updater tool, connect the device via USB, and follow the instructions. Do not disconnect during the process.
Why is there no sound coming from the speakers?
Check that the power adapter is connected and the device is turned on. Ensure the master volume is raised and the channel faders are up. Verify the audio source is playing and properly connected. Also check the output cables.
Can I map the pads to different functions in software?
Yes, the PAD-12 sends standard MIDI notes and can be customized in most DJ software. Use the software's MIDI mapping mode to assign commands to each pad.
What is the power consumption?
The PAD-12 consumes approximately 15 Watts when in use. Always use the supplied 12V DC adapter to avoid damage.
How do I clean the PAD-12?
Use a soft, dry cloth to wipe the surface. For stubborn dirt, slightly dampen the cloth with water. Do not use alcohol, solvents, or abrasive cleaners, as they may damage the finish.
Is the PAD-12 compatible with Traktor?
Yes, it works as a MIDI controller with Traktor. You may need to download a custom mapping or create your own. The device is class-compliant, so no special drivers are required.
What should I do if a fader becomes loose or scratchy?
Spare faders are available from Omnitronic. If you are experienced, you can replace them yourself. Otherwise, contact an authorized service center. Avoid using lubricants.
User questions about PAD-12 Omnitronic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your DJ Equipment in PDF format for free! Find your manual PAD-12 - Omnitronic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PAD-12 by Omnitronic.