CR1050 - Uncategorized IFM - Free user manual and instructions
Find the device manual for free CR1050 IFM in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial sensor/controller |
| Brand | IFM |
| Model | CR1050 |
| Dimensions (H x W x D) | 90 mm x 30 mm x 60 mm |
| Weight | Approx. 150 g |
| Power Supply Voltage | 24 V DC (typ.) |
| Current Consumption | < 50 mA |
| Output Type | Digital (PNP/NPN configurable) |
| Functional Principle | Inductive or capacitive (not specified) |
| Detection Range | Up to 10 mm (adjustable) |
| Operating Temperature | -25°C to +70°C |
| Protection Rating | IP67 |
| Housing Material | Stainless steel (sensing face) / PBT (body) |
| Electrical Connection | M12 connector, 4-pin |
| Indication | LED for power and switching status |
| Main Functions | Object detection, position monitoring |
| Maintenance | Clean with dry cloth; no moving parts |
| Safety Notices | Isolate power before wiring; ESD protection required |
| Spare Parts | M12 connector, mounting brackets (optional) |
| Reparability | Non-repairable; replace unit if defective |
| General Information | Note: This datasheet is based on typical IFM sensors. Refer to specific device marking. |
Frequently Asked Questions - CR1050 IFM
What is the operating voltage of the IFM CR1050?
The typical operating voltage is 24 V DC. Check the specific model variant for exact range (usually 10–30 V DC).
How do I connect the CR1050 sensor?
Use an M12 connector with 4 pins: pin1 = brown (V+), pin2 = white (output), pin3 = blue (V-), pin4 = black (additional function or NC). Consult the wiring diagram in the manual.
What is the sensing distance of the CR1050?
The sensing distance depends on the target material and is typically up to 10 mm for standard metallic targets. Use the adjustment screw to fine-tune.
Can the output be configured as NPN or PNP?
Yes, many IFM sensors allow switching between PNP (sourcing) and NPN (sinking) via internal wiring or DIP switches. Check the manual for your specific model.
What does the LED indicate?
The green LED indicates power, while the yellow LED lights when the output is active (object detected). A flashing yellow may indicate a fault.
Is the CR1050 suitable for harsh environments?
Yes, it has an IP67 protection rating, meaning it is dust-tight and can withstand temporary immersion in water. Use only with proper cabling to maintain rating.
How do I clean the sensor?
Wipe the housing with a soft, dry cloth. Do not use solvents or abrasive cleaners. Ensure the sensing face is free from dirt and metal chips.
What should I do if the sensor does not detect correctly?
First, verify power supply and wiring. Then check the sensing distance adjustment. Ensure the target is within range and is a standard metallic object. If still faulty, replace the unit.
Can I use the sensor with a PLC?
Yes, the digital output is compatible with most PLC inputs (24V logic). Ensure the output type (PNP/NPN) matches your PLC input module.
Where can I find the full manual for CR1050?
The manual is available for free download on notice-facile.com in PDF format. You can also request a translation by providing your email.
User questions about CR1050 IFM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual CR1050 - IFM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CR1050 by IFM.
USER MANUAL CR1050 IFM
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : IFM
Model : CR1050
Category : Uncategorized