H910 - Audio processor EVENTIDE - Free user manual and instructions
Find the device manual for free H910 EVENTIDE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Audio Processor (Harmonizer/Pitch Shifter) |
| Brand | Eventide |
| Model | H910 |
| Manufactured | Mid-1970s |
| Form Factor | 19" rackmount, 1U height |
| Dimensions (HxWxD) | 1.75" x 19" x 8" (44.5 mm x 483 mm x 203 mm) |
| Weight | Approx. 10 lbs (4.5 kg) |
| Power Requirements | 120V AC, 50/60 Hz, 30W |
| Primary Function | Pitch shifting and harmonization |
| Additional Features | Delay, feedback, program selection, mix control |
| Input/Output | 1/4" unbalanced input and output |
| Controls | Knobs for pitch, delay, feedback, mix; push buttons for program |
| Indicators | LED power indicator, program LEDs |
| Construction | Metal chassis with anodized aluminum front panel |
| Cooling | Passive (no fan) |
| Operating Temperature | 10°C to 40°C (50°F to 104°F) |
| Cleaning Instructions | Wipe with a soft, dry cloth. Do not use liquids or solvents. |
| Safety Precautions | Use only with proper grounded AC outlet. Avoid moisture. Do not open chassis. |
| Spare Parts & Repairability | Contact Eventide or authorized service centers. Some parts may be obsolete. |
| General Information | Vintage rack effect processor. Known for its distinctive sound. Manual available online. |
Frequently Asked Questions - H910 EVENTIDE
How do I connect the H910 to my mixer?
Use standard 1/4" TS cables. Connect the output from your mixer to the H910 input, then from the H910 output to a mixer channel return or auxiliary return.
What does the 'Program' knob do?
The Program knob selects preset pitch shift intervals (e.g., unison, fifth, octave) and effect configurations. Turn to choose a program.
How do I achieve a perfect octave up?
Set the Program knob to 'OCTAVE' (usually program 9 or 10) and adjust the Mix knob to blend the shifted signal with the dry signal.
Why is the output level low?
Check the Mix control: if it's at 100% wet, you'll only hear the shifted signal. Turn the Mix knob to include dry signal. Also ensure input level is sufficient.
Can I use the H910 in stereo?
The H910 is mono in/out. For stereo effects, use two units or a stereo reverb after the H910.
How do I create a slapback echo?
Set the delay knob to a moderate setting (e.g., 100-200 ms) and lower the pitch shift to zero. Increase feedback for multiple repeats.
What is the maximum delay time?
The H910 offers up to 1 second of delay when pitch shift is set to zero. With pitch shifting, delay time varies inversely.
Does the H910 require any special power cord?
It uses a standard grounded IEC power cord. Ensure the voltage matches your region (120V AC for US models).
How do I maintain the H910?
Keep it dry and dust-free. Clean the front panel with a soft cloth. Do not use any cleaning agents. Periodically check cables and connectors.
Where can I find replacement knobs or switches?
Contact Eventide support or search for vintage parts suppliers. Some knobs are standard 1/4" knurled shaft types.
User questions about H910 EVENTIDE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Audio processor in PDF format for free! Find your manual H910 - EVENTIDE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. H910 by EVENTIDE.
USER MANUAL H910 EVENTIDE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : EVENTIDE
Model : H910
Category : Audio processor