DG952 - Generator Rigol - Free user manual and instructions
Find the device manual for free DG952 Rigol in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dual-Channel Function/Arbitrary Waveform Generator |
| Model | DG952 |
| Brand | Rigol |
| Channels | 2 |
| Maximum Frequency | 50 MHz |
| Sample Rate | 125 MSa/s |
| Vertical Resolution | 14 bits |
| Output Waveforms | Sine, Square, Ramp, Pulse, Noise, Arb (up to 48 built-in), User-defined |
| Amplitude Range | 1 mVpp to 10 Vpp (into 50 Ω) |
| Modulation Types | AM, FM, PM, FSK, PSK, PWM |
| Sweep & Burst | Linear and logarithmic sweep; burst mode (count, gated) |
| Display | 3.5-inch TFT LCD color touchscreen |
| Interfaces | USB Host, USB Device, LAN (optional), external trigger input/output |
| Power Supply | 100-240 VAC, 50/60 Hz, < 50 W |
| Dimensions (W×H×D) | 232 mm × 108 mm × 280 mm |
| Weight | Approximately 2.5 kg |
| Operating Temperature | 10°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Maintenance | Keep clean and dry; use soft cloth to clean; avoid liquids |
| Safety | Overvoltage protection (CAT I); safety ground via power cord |
| Reparability | Refer to authorized service center; no user-serviceable parts internally |
Frequently Asked Questions - DG952 Rigol
How do I set the output frequency on the DG952?
Press the Sine or desired waveform key, then use the numeric keypad to enter the frequency value, or rotate the knob for adjustment. Confirm by pressing the corresponding unit key (Hz, kHz, MHz).
What is the maximum output amplitude?
The maximum amplitude is 10 Vpp into a 50 Ω load. For high-impedance loads, it can reach 20 Vpp.
How can I generate a custom arbitrary waveform?
Use the Arb function. You can select a built-in arbitrary waveform or use the software (Rigol UltraStation) to create and upload a waveform via USB.
Does the DG952 support sweep and burst modes?
Yes, it supports linear and logarithmic sweep as well as burst mode with configurable count or gated trigger.
How do I save and recall instrument settings?
Press the Utility key, then select Store/Recall. You can save up to 10 instrument states to internal non-volatile memory.
What is the output impedance of the DG952?
The output impedance is 50 Ω nominal. The instrument automatically sets the amplitude based on the selected load impedance (High Z or 50 Ω) through the menu.
Can I synchronize two channels?
Yes, you can combine both channels into differential or common mode output, or set them to run with a fixed phase relationship using the Coupling function.
How to update the firmware?
Download the latest firmware from the Rigol website, copy it to a USB flash drive, then plug it into the generator. Go to Utility > System > Update and follow the prompts.
What is the warranty period?
Rigol typically offers a 3-year warranty for the DG952. For details, check the included warranty card or contact your distributor.
How to clean the instrument?
Use a soft, dry cloth to wipe the exterior. Avoid using any liquid cleaners or solvents. Do not clean the interior as there are no user-serviceable parts.
User questions about DG952 Rigol
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Generator in PDF format for free! Find your manual DG952 - Rigol and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DG952 by Rigol.
USER MANUAL DG952 Rigol
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Rigol
Model : DG952
Category : Generator