BI WMHG 81485 UK - Washing machine HOTPOINT - Free user manual and instructions
Find the device manual for free BI WMHG 81485 UK HOTPOINT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Washing Machine |
| Brand | Hotpoint |
| Model | BI WMHG 81485 UK |
| Capacity | 8 kg |
| Maximum Spin Speed | 1400 rpm |
| Energy Efficiency Class | A+++ (EU 2016) |
| Dimensions (H x W x D) | 820 mm x 596 mm x 540 mm |
| Weight | Approx. 65 kg |
| Power Supply | 220-240 V, 50 Hz, 10 A |
| Washing Programs | 15 (including Cotton, Synthetics, Delicates, Wool, Quick 30', Eco 40-60, Rinse + Spin, Spin Only, etc.) |
| Noise Level (Wash/Spin) | 56 dB / 76 dB |
| Annual Water Consumption | ~9,000 liters (based on 220 cycles) |
| Annual Energy Consumption | ~137 kWh (based on 220 cycles) |
| Special Features | Delay Start (up to 24h), Quick Wash, Anti-Stain, Extra Rinse, Child Lock |
| Installation | Built-in under counter, adjustable feet |
| Maintenance | Clean filter regularly, run maintenance wash with drum cleaner |
| Safety | Child lock, overflow protection, unbalanced load detection |
| Spare Parts Availability | Common parts (door seal, pump, belt) available from Hotpoint authorized dealers |
Frequently Asked Questions - BI WMHG 81485 UK HOTPOINT
How do I install the Hotpoint BI WMHG 81485 UK washing machine?
Ensure the area is level and the appliance is placed on a solid floor. Remove all packaging and transport bolts. Connect the water inlet hose to a cold water supply with 3/4 inch threaded tap. Connect the drain hose to a standpipe or sink drain. Plug into a grounded outlet. Adjust the feet to level the machine. Refer to the manual for detailed steps.
What should I do if the washing machine does not start?
Check that the door is fully closed and latched. Ensure the water supply is turned on and the drain hose is not blocked. Verify that the machine is plugged in and the circuit breaker is on. Select a program and press the Start/Pause button. If it still does not start, check for error codes on the display.
How do I clean the filter on this model?
Open the bottom panel (usually behind a flap). Place a bowl underneath to catch water. Turn the filter knob counterclockwise and pull out. Remove any lint or debris. Clean the filter under running water. Reinsert and turn clockwise until tight. Close the panel. Clean the filter every 2-3 months.
What does error code F01 mean?
Error F01 indicates a motor tachometer problem. This often means the motor is not spinning correctly. Try resetting the machine by unplugging for 1 minute. If the error persists, contact a qualified technician as it may require replacing the motor or control board.
Can I use a longer delay start?
Yes, the delay start function can be set up to 24 hours. Select your wash program, then press the delay button repeatedly to choose the desired delay time (e.g., 3h, 6h, 9h, etc.). The machine will start automatically after the delay period.
What is the recommended detergent for this machine?
Use a high-efficiency (HE) detergent for front-load washers. For cotton programs, use powder detergent. For synthetics and delicates, use liquid detergent. Always follow the detergent manufacturer's instructions and avoid overdosing to prevent residues.
How do I run a maintenance wash?
Empty the machine and add a drum cleaner or a cup of white vinegar into the detergent drawer. Select a hot wash program (e.g., Cotton 60°C or 90°C) and let it run without laundry. This removes bacteria, mold, and odor. Repeat every 2 months.
Why is the washing machine vibrating excessively?
Ensure the transport bolts are removed. Level the machine by adjusting the feet. Check that the load is balanced; wash mixed loads and avoid overloading. Place the machine on a solid, even floor. If vibration persists, inspect the shock absorbers.
How do I access the spare parts?
Spare parts for the Hotpoint BI WMHG 81485 UK can be ordered through Hotpoint's official website or authorized service centers. Common parts like door seal, drain pump, and belt are available. Have your model number and serial number ready.
What should I do if the door won't open after a cycle?
Wait for a few minutes until the door lock releases. If the machine has drained but the door still locked, check for water inside the drum (overload or drain issue). If the problem persists, try the emergency door release: locate the small tab near the door filter (refer to manual) and pull to release the door.
User questions about BI WMHG 81485 UK HOTPOINT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual BI WMHG 81485 UK - HOTPOINT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BI WMHG 81485 UK by HOTPOINT.
USER MANUAL BI WMHG 81485 UK HOTPOINT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HOTPOINT
Model : BI WMHG 81485 UK
Category : Washing machine