AMAP14HAW - Air Conditioning AMANA - Free user manual and instructions
Find the device manual for free AMAP14HAW AMANA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Monoblock mobile air conditioner |
| Model | AMAP14HAW |
| Brand | Amana |
| Cooling capacity | 14,000 BTU/h (4.1 kW) |
| Recommended area | Up to 35 m² |
| Power supply | 220-240 V ~ 50 Hz |
| Power consumption | Approx. 1,350 W |
| Energy efficiency class | A |
| Noise level | 52 dB(A) (in cooling mode) |
| Dimensions (W × D × H) | 45 × 35 × 70 cm |
| Net weight | 28 kg |
| Airflow rate | 7 m³/min (in cooling mode) |
| Main functions | Cooling, ventilation, dehumidification, 24h timer |
| Control | Remote control + touch panel |
| Filter | Washable filter (clean every 2 weeks) |
| Maintenance and cleaning | Clean the filter with lukewarm water, do not use solvents |
| Safety | Automatic shut-off in case of overheating, compressor protection |
| Available spare parts | Filter, remote control, exhaust kit |
| Repairability | Repairability index not disclosed, standard parts |
| General information | User manual in PDF format available online |
Frequently Asked Questions - AMAP14HAW AMANA
How to install the AMAP14HAW air conditioner correctly?
Place the unit near a window or door to exhaust hot air through the provided exhaust hose. Ensure the exhaust kit is correctly installed and that the unit is level.
How often should the filter be cleaned?
It is recommended to clean the filter every two weeks during use season. A dirty filter reduces efficiency and may damage the unit.
The remote control does not work, what should I do?
Check the remote control batteries. If they are dead, replace them with new AAA batteries. Ensure no obstacles block the signal between the remote and the receiver on the unit.
How to use the timer?
Press the Timer button on the remote control. Use the + or - buttons to set the delay for shut-off or start-up (from 1 to 24 hours). Confirm with the Enter button.
What does error code E1 mean?
Error code E1 indicates a fault with the room temperature sensor. Turn off the unit, unplug it, wait a few minutes, then plug it back in. If the code persists, contact customer service.
Water accumulates in the unit, is this normal?
Yes, in dehumidification mode, water is collected in an internal tank. If the tank is full, the unit stops automatically and displays an indicator. Empty the tank through the drain opening.
Can I use the air conditioner without external exhaust?
No, the exhaust hose is necessary to expel hot air. Without it, the unit will not cool effectively and may overheat.
How to switch from cooling mode to fan mode?
Press the Mode button on the remote control or control panel to cycle through modes: Cool, Dehumidify, Fan. Select the desired mode.
Where can I find spare parts like the filter or remote control?
You can order spare parts from Amana customer service or on approved spare parts websites. Use the model reference AMAP14HAW.
How to reset the air conditioner?
Unplug the unit from the power outlet, wait 10 minutes, then plug it back in. This resets the factory settings. If the problem persists, consult the manual.
User questions about AMAP14HAW AMANA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual AMAP14HAW - AMANA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AMAP14HAW by AMANA.
USER MANUAL AMAP14HAW AMANA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AMANA
Model : AMAP14HAW
Category : Air Conditioning