LSPU8612S - Dishwasher SMEG - Free user manual and instructions
Find the device manual for free LSPU8612S SMEG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Dishwasher |
| Brand | Smeg |
| Model | LSPU8612S |
| Energy Class | A++ |
| Dimensions (H x W x D) | 82 cm x 60 cm x 55 cm |
| Weight | 45 kg |
| Power Supply | 220-240 V, 50 Hz, 10 A |
| Number of Place Settings | 14 |
| Noise Level | 44 dB(A) |
| Water Consumption per Cycle | 9.5 L |
| Annual Energy Consumption | 266 kWh |
| Drying Performance Class | A |
| Number of Programs | 8 |
| Key Programs | Eco 50°C, Intensive 70°C, Normal 65°C, Quick 30 min, Glass, Soak, Auto, Self-Clean |
| Control Type | Electronic touch controls + LED display |
| Delay Start | Yes (up to 24 hours) |
| Child Lock | Yes |
| Water Protection | Fully leak-proof (AquaStop) |
| Cleaning & Maintenance | Clean filters regularly, descale every 3 months, clean door seals |
| Spare Parts Availability | Filters, hoses, racks, spray arms, control boards available at authorized service |
| Reparability Index | 7.9/10 |
Frequently Asked Questions - LSPU8612S SMEG
How do I install my Smeg LSPU8612S dishwasher?
Refer to the installation manual. Generally, you need a 60 cm wide space, connect to cold water (3/4 inch thread), drain hose into sink waste, and power supply with a grounded outlet. Ensure the unit is level.Always consult a professional if unsure.
What programs does the LSPU8612S have?
It has 8 programs: Eco 50°C, Intensive 70°C, Normal 65°C, Quick 30 min, Glass, Soak, Auto, and Self-Clean. The Self-Clean program is for cleaning the interior of the dishwasher.
How do I clean the filters?
Turn off the dishwasher, remove the bottom rack, unscrew the filter assembly, rinse under running water, remove any debris, reassemble and tighten. Do this every month to maintain performance.
Why is my dishwasher not draining?
Check if the drain hose is kinked or clogged. Inspect the filter for blockage. Also, ensure the sink drain is not blocked. If the problem persists, the drain pump may need servicing.
How do I start a delayed wash?
Select a program, then press the Delay button (hourglass icon). Set the delay time in hours (1-24) using the + or - buttons. Press Start. The dishwasher will finish after the set delay.
What does the AquaStop system do?
AquaStop is a water protection system that automatically shuts off the water supply if a leak is detected, preventing flooding. It consists of a solenoid valve and a safety hose.
How do I descale the dishwasher?
Use a commercial dishwasher descaler or a mixture of vinegar and water (1:1). Run the hottest cycle with no dishes. Alternatively, use the Self-Clean program with a descaler. Repeat every 3 months.
The dishes are not dry after the cycle, what can I do?
Ensure you use rinse aid and select a program with drying. Check that the heating element works. Also, leave the door slightly open after the cycle for steam to escape. For better drying, use the Extra Dry option if available.
Can I use tabs instead of powder detergent?
Yes, dishwasher tablets are suitable. Place them in the detergent dispenser. If using all-in-one tabs, adjust the rinse aid setting to '0' or 'low' to avoid over-sudsing. Some cycles may not dissolve properly with tabs.
Where can I find spare parts for LSPU8612S?
Contact Smeg authorized service centers or visit the Smeg website. Common parts like filters, spray arms, racks, and hoses are available. Use the model number LSPU8612S to ensure compatibility.
User questions about LSPU8612S SMEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual LSPU8612S - SMEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LSPU8612S by SMEG.