CA-HR-FOR-EVO.002 - Uncategorized PIONEER - Free user manual and instructions
Find the device manual for free CA-HR-FOR-EVO.002 PIONEER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Uncategorized Electronic Device |
| Brand | Pioneer |
| Model | CA-HR-FOR-EVO.002 |
| Dimensions (Approx.) | 180 x 50 x 120 mm |
| Weight | 0.5 kg |
| Power Supply | 12V DC (automotive standard) |
| Main Functions | Playback, tuning, connectivity |
| Display Type | LCD with backlight |
| Supported Media | CD, USB, AUX |
| Audio Output | 4-channel, 50W max |
| Connectivity | Bluetooth, USB, auxiliary input |
| Control Method | Buttons and rotary encoder |
| Mounting Type | DIN slot |
| Operating Temperature | -10°C to 60°C |
| Maintenance | Clean with soft dry cloth; avoid solvents |
| Safety Notices | Do not expose to moisture; disconnect battery before installation |
| Spare Parts Availability | Contact Pioneer support for replacement parts |
| Repairability | Serviceable by authorized technicians only |
| Included Accessories | Mounting kit, wiring harness, remote control |
| Compliance | CE, RoHS |
Frequently Asked Questions - CA-HR-FOR-EVO.002 PIONEER
How do I pair my phone via Bluetooth?
Enable Bluetooth on your phone, then press the BT button on the device until 'PAIRING' appears. Select 'CA-HR-FOR-EVO' from your phone's Bluetooth list. Enter '0000' if prompted.
Why is there no sound from the speakers?
Check that the volume is not muted or set too low. Ensure the speaker wires are properly connected and the source device is playing. Also verify the fader and balance settings.
Can I play music from a USB drive?
Yes, insert a USB drive with MP3 or WMA files into the USB port. The device will automatically detect and play the files. Use the SRC button to select USB mode.
How do I reset the device to factory settings?
Press and hold the SRC button for about 5 seconds until 'RESET' appears on the display. Confirm by pressing the volume knob. This will erase all custom settings.
What should I do if the device does not turn on?
Check the vehicle's fuse for the radio circuit. Verify that the wiring harness is correctly connected to the battery and ground. Ensure the ignition is in the ACC or ON position.
Can I connect an external amplifier?
Yes, the device has preamp outputs (front and rear) for connecting external amplifiers. Use standard RCA cables to connect to your amplifier's input.
How do I adjust the audio settings?
Press the AUDIO button to cycle through bass, treble, balance, fader, and loudness. Turn the volume knob to adjust each setting. Press AUDIO again to save.
What radio bands are supported?
The device supports FM (87.5-108 MHz) and AM (530-1710 kHz) bands. It can store up to 18 FM and 12 AM presets.
Does the unit have a remote control?
Yes, a remote control is included. It allows you to change volume, source, track, and basic settings. Ensure the remote has a working CR2025 battery.
How do I clean the device?
Turn off the device and disconnect power. Use a soft, dry microfiber cloth to wipe the exterior. Do not use any liquids, aerosols, or abrasive cleaners.
User questions about CA-HR-FOR-EVO.002 PIONEER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual CA-HR-FOR-EVO.002 - PIONEER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CA-HR-FOR-EVO.002 by PIONEER.
USER MANUAL CA-HR-FOR-EVO.002 PIONEER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PIONEER
Model : CA-HR-FOR-EVO.002
Category : Uncategorized