Reserve R300 - Speaker DENON - Free user manual and instructions
Find the device manual for free Reserve R300 DENON in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Denon |
| Model | Reserve R300 |
| Product type | Speaker (bookshelf) |
| Dimensions (W x H x D) | 200 x 300 x 250 mm |
| Weight | 5 kg |
| Amplification | External amplification recommended |
| Connectivity | Screw terminals (bare wire, banana plugs) |
| Power handling | 100 W RMS |
| Frequency response | 45 Hz - 30 kHz |
| Impedance | 6 ohms |
| Sensitivity | 88 dB (1W/1m) |
| Number of ways | 2-way (tweeter and woofer) |
| Cabinet material | MDF with vinyl finish |
| Recommended placement | On shelf or stand, at least 20 cm from the wall |
| Care and cleaning | Wipe with a soft dry cloth. Do not use abrasive products. |
| Safety instructions | Do not expose to moisture, do not open the cabinet. |
| Spare parts and repairability | Contact Denon customer service or an authorized technician. |
| Warranty | 2 years (according to applicable law) |
| Included accessories | User manual, connection cable (depending on version) |
Frequently Asked Questions - Reserve R300 DENON
How to connect the Denon Reserve R300 speaker to an amplifier?
Use the screw terminals on the back. Strip the cables 1 cm, loosen the knobs, insert the wire, then tighten. Respect polarity (+/-).
Can I use these speakers with a 50 W amplifier?
Yes, the recommended power is 30 to 120 W RMS. A 50 W amplifier is perfectly suitable.
What is the diameter of the tweeter and woofer?
The tweeter measures 25 mm (1 inch) and the woofer 130 mm (5.25 inches).
How to clean the speaker?
Use a slightly damp microfiber cloth for the cabinet. For the cones, use a soft brush or compressed air. Avoid any liquid.
Are the speakers magnetically shielded?
No, they are not shielded. Keep them at least 50 cm away from CRT screens or hard drives.
Can I place them on a shelf?
Yes, but use rubber pads to avoid vibrations. Do not place them too close to the wall to avoid altering the bass.
What speaker cable to use?
A cable with a cross-section of 1.5 mm² to 2.5 mm² is sufficient for lengths under 5 meters.
Is there a break-in period?
It is recommended to let the speakers run for about twenty hours at moderate volume to stabilize the suspensions.
How to fix a crackling sound?
Check the cable connections and the cleanliness of the terminals. Crackling may also come from the amplifier or distortion due to overload.
What to do if a driver stops working?
Check the connections and the amplifier balance. If one side remains silent, swap the cables to confirm. Contact Denon customer service for a replacement.
User questions about Reserve R300 DENON
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual Reserve R300 - DENON and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Reserve R300 by DENON.
USER MANUAL Reserve R300 DENON
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DENON
Model : Reserve R300
Category : Speaker