DS-2FM2466 - Detector Hikvision - Free user manual and instructions
Find the device manual for free DS-2FM2466 Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Camera |
| Model | DS-2FM2466 |
| Brand | Hikvision |
| Image Sensor | 1/2.8" Progressive Scan CMOS |
| Resolution | 2 MP (1920 × 1080) |
| Lens | 2.8 mm, fixed |
| IR Range | Up to 30 m |
| Video Compression | H.265+/H.265/H.264+/H.264 |
| Network Interface | 1 × RJ45 10M/100M self-adaptive Ethernet port |
| Power Supply | 12 V DC ± 25%, PoE (802.3af) |
| Power Consumption | Max. 7 W |
| Dimensions | Φ 111 mm × 82 mm |
| Weight | Approx. 380 g |
| Operating Temperature | -30 °C to +60 °C |
| Ingress Protection | IP66 |
| Main Functions | Night vision (up to 30 m), motion detection, intrusion detection, line crossing detection, region entrance/exit detection |
| Storage | Supports microSD/SDHC/SDXC card up to 256 GB |
| Audio | Built-in microphone |
| Alarm Input/Output | 1/1 alarm input/output |
| Mounting | Ceiling / Wall mount |
| Maintenance | Clean the lens with a soft, dry cloth. Avoid using solvents or abrasive cleaners. |
| Safety | Disconnect power before installation. Use only Hikvision-certified power adapter. |
| Spare Parts | Power adapter, mounting bracket, screws, waterproof connector (included) |
| Reparability | Not user-serviceable. Contact Hikvision support for repairs. |
Frequently Asked Questions - DS-2FM2466 Hikvision
How to reset the camera to factory defaults?
Press and hold the reset button (located on the camera body) for 10 seconds until the LED indicator flashes. The camera will reboot with factory settings. Default IP address is 192.168.1.64.
How to access the camera via web browser?
Connect the camera to the same network as your computer. Open a browser and enter the camera's IP address (default: 192.168.1.64). Log in with default credentials: admin / admin12345. Install the required plugins if prompted.
What is the default username and password?
Default username is admin and default password is admin12345. It is strongly recommended to change the password upon first login for security.
Can I use PoE to power the camera?
Yes, the camera supports PoE (IEEE 802.3af). Simply connect it to a PoE switch or injector. It also supports 12 V DC input.
What is the maximum storage capacity for microSD card?
The camera supports microSD/SDHC/SDXC cards up to 256 GB. Class 10 or above is recommended for continuous recording.
Does the camera have audio support?
Yes, the camera has a built-in microphone for audio capture. Audio can be listened to live or recorded simultaneously with video.
How far can the IR LEDs see at night?
The IR range is up to 30 meters (98 ft) in complete darkness, providing clear black-and-white video.
What is the camera's IP rating?
The camera has an IP66 rating, making it weatherproof and suitable for outdoor use. It is protected against dust and powerful water jets.
Can I use the camera with third-party NVRs?
The camera supports ONVIF (Profile S), RTSP, and other standard protocols. It is compatible with most third-party NVRs that support these protocols.
How to clean the camera lens?
Use a soft, dry microfiber cloth to gently wipe the lens. If needed, dampen the cloth with a small amount of lens cleaning solution. Avoid using harsh chemicals or paper towels.
User questions about DS-2FM2466 Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Detector in PDF format for free! Find your manual DS-2FM2466 - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-2FM2466 by Hikvision.
USER MANUAL DS-2FM2466 Hikvision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hikvision
Model : DS-2FM2466
Category : Detector