Photo Gear - Tripod KODAK - Free user manual and instructions
Find the device manual for free Photo Gear KODAK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tripod |
| Brand | Kodak |
| Model | Photo Gear |
| Material | Aluminum alloy |
| Max Height | 150 cm (59 in) |
| Folded Height | 50 cm (19.7 in) |
| Weight | 1.2 kg (2.65 lbs) |
| Load Capacity | 3 kg (6.6 lbs) |
| Leg Sections | 3 |
| Lock Type | Flip locks |
| Head Type | Pan/tilt head with quick release plate |
| Leveling Bubble | Yes |
| Compatible Devices | Cameras, camcorders, smartphones with adapter |
| Accessories Included | Carrying bag, smartphone holder, quick release plate |
| Power Source | None (manual operation) |
| Maintenance | Wipe clean with dry cloth; avoid water and solvents |
| Safety | Do not exceed maximum load; secure on stable ground |
| Spare Parts / Repairability | Quick release plates and rubber feet available separately |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - Photo Gear KODAK
How do I set up the tripod for the first time?
Extend the legs one by one by unlocking the flip locks. Adjust each leg to the desired length and lock them securely. Attach the camera plate to your camera, then slide it onto the tripod head until it clicks.
Can I use this tripod with a smartphone?
Yes, the included smartphone holder allows you to securely mount your phone. Simply clamp the holder onto the tripod head and place your phone inside.
What is the maximum weight this tripod can hold?
The Kodak Photo Gear tripod has a maximum load capacity of 3 kg (6.6 lbs), suitable for most DSLR and mirrorless cameras.
How do I clean and maintain the tripod?
Use a soft, dry cloth to wipe the legs and head. For stubborn dirt, slightly dampen the cloth with water. Avoid solvents or harsh chemicals. Keep the locks free of sand and dust.
Why is my camera not stable on the tripod?
Ensure all leg locks are fully tightened and the tripod is on level ground. Check that the quick release plate is securely attached to the camera and locked into the head. Use the center column hook to add weight for extra stability.
Can I adjust the height of the tripod without extending the legs?
Yes, the center column can be raised or lowered by loosening the collar at the top. However, for maximum stability, extend the legs first before using the center column.
How do I swivel the head for portrait orientation?
Loosen the tilt lock lever on the pan/tilt head, then tilt the camera 90 degrees. Tighten the lever to lock it in place. You can also rotate the head horizontally for panning.
Is the tripod compatible with all camera brands?
Yes, the universal quick release plate fits any camera with a standard 1/4-20 tripod screw thread. It works with Canon, Nikon, Sony, Fuji, and other brands.
What should I do if a rubber foot falls off?
You can order replacement rubber feet from Kodak support. To reattach, simply push the new foot onto the leg tip. For a temporary fix, you can use a plastic cap or electrical tape.
How do I store the tripod when not in use?
Collapse the legs, lower the center column, and fold the legs together. Secure with the attached strap and store in the carrying bag. Keep it in a dry place away from extreme temperatures.
User questions about Photo Gear KODAK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tripod in PDF format for free! Find your manual Photo Gear - KODAK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Photo Gear by KODAK.
USER MANUAL Photo Gear KODAK
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : KODAK
Model : Photo Gear
Category : Tripod