93LCLGR - Laser level Klein Tools - Free user manual and instructions
Find the device manual for free 93LCLGR Klein Tools in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Laser Level |
| Brand | Klein Tools |
| Model | 93LCLGR |
| Dimensions (approx.) | 10 x 6 x 5 cm |
| Weight (with batteries) | 0.3 kg |
| Power Supply | 2 AA batteries (1.5 V) |
| Projection | Horizontal and vertical lines |
| Self-leveling | Yes, ±4° range |
| Accuracy | ±0.3 mm/m |
| Range | Up to 15 m (with detector) |
| Laser Class | II (power <1 mW, 635 nm) |
| Operating Modes | Horizontal line, vertical line, cross |
| Mounting | 1/4" thread for tripod |
| Enclosure Rating | IP54 (splash resistant) |
| Operating Temperature | -10 °C to 50 °C |
| Care and Cleaning | Clean with a soft, dry cloth. Do not use solvents. |
| Safety | Do not look directly into the beam. Use with caution. |
| Spare Parts and Repairability | Standard AA batteries available. For other parts, contact Klein Tools. |
| General Information | Use for alignments, interior and light exterior leveling. |
Frequently Asked Questions - 93LCLGR Klein Tools
How to change the batteries of the Klein Tools 93LCLGR laser level?
Open the battery compartment located under the device by sliding the cover. Insert two AA batteries respecting polarity (+/-). Close the cover until it clicks.
What to do if the self-leveling does not work?
Check that the device is on a stable surface and that the tilt angle does not exceed ±4°. If the problem persists, the batteries may be low or the device needs recalibration.
What is the accuracy of the Klein Tools 93LCLGR laser?
The accuracy is ±0.3 mm/m. For longer range, use a laser detector to improve visibility.
Can I use this laser level outdoors?
Yes, but the beam may be hard to see in direct sunlight. Using a laser detector is recommended for better visibility. The device is rated IP54, so it is splash resistant.
How to clean the laser level?
Use a soft, dry cloth to wipe the housing. Avoid solvents or abrasive products that could damage the optics or housing.
Does the laser emit a dangerous beam?
The laser is Class II, meaning it is safe for unintentional exposure, but do not look directly into the beam. Avoid pointing towards eyes.
How to mount the laser level on a tripod?
Screw the tripod into the 1/4 inch thread located under the device. Make sure the mount is tight to avoid any movement during use.
What is the maximum range without detector?
Without detector, the range is about 10 m under normal lighting conditions. With a detector, it can reach up to 15 m.
What to do if the device does not turn on?
First check that the batteries are correctly installed and not discharged. Replace the batteries if necessary. If the problem persists, contact Klein Tools customer service.
How to calibrate the laser level?
The laser level is factory calibrated. If you suspect a calibration issue, perform a test on a flat surface and compare with a reference level. If the discrepancy is significant, contact Klein Tools for recalibration.
User questions about 93LCLGR Klein Tools
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Laser level in PDF format for free! Find your manual 93LCLGR - Klein Tools and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 93LCLGR by Klein Tools.
USER MANUAL 93LCLGR Klein Tools
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Klein Tools
Model : 93LCLGR
Category : Laser level