MadMaxx BT-CS004 - Electric saw Batavia - Free user manual and instructions
Find the device manual for free MadMaxx BT-CS004 Batavia in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Battery-Powered Chainsaw |
| Brand | Batavia |
| Model | MadMaxx BT-CS004 |
| Rated Voltage | 18 V |
| Guide Bar Length | 30 cm |
| Chain Pitch | 3/8" Low Profile |
| Maximum Cutting Capacity | 25 cm |
| Weight (without battery) | 3.5 kg |
| Sound Power Level | 95 dB(A) |
| Vibration Level | 5.0 m/s² |
| Battery Type | Lithium-ion (compatible with MadMaxx series) |
| Runtime (with 4 Ah battery) | Approximately 50 cuts (10 cm wood) |
| Charging Time (standard charger) | 60 min for 4 Ah |
| Automatic Lubrication System | Yes |
| Oil Tank Capacity | 150 ml |
| Chain Brake | Yes |
| Hand Guard | Yes |
| Tool-Free Chain Tensioning | Yes |
| Safety Switch | Yes |
| Guide Bar Material | Steel |
| Recommended Use | Cutting firewood, pruning, felling small trees |
| Recommended Maintenance | Clean after each use, check tension, and lubricate regularly |
| Safety Equipment | Goggles, gloves, ear protection |
Frequently Asked Questions - MadMaxx BT-CS004 Batavia
How to tension the chain on my Batavia MadMaxx BT-CS004 saw?
To tension the chain, loosen the tensioning knob, turn the tensioning screw clockwise until the chain is properly adjusted (it should be able to be lifted 2 to 3 mm at the middle of the guide bar), then retighten the knob. Refer to the manual for detailed instructions.
What oil should I use for chain lubrication?
Use a special chainsaw bar and chain oil (vegetable or mineral). Never use used motor oil. An adhesive oil is recommended for better lubrication.
Is the battery interchangeable with other Batavia MadMaxx tools?
Yes, the 18 V battery from the MadMaxx series is compatible with all tools in this range (drills, screwdrivers, etc.). You can therefore share batteries among several devices.
What to do if the chain does not cut straight?
First check the chain tension and sharpen it if necessary. A worn guide bar can also cause the cut to deviate. If the problem persists, replace the chain or the guide bar.
How to clean the guide bar?
After each use, remove the chain and clean the guide bar groove with a cleaning tool or a brush. Also check the oil hole to make sure it is not clogged.
Can I use a higher capacity battery?
Yes, you can use batteries of higher capacity (e.g., 5 Ah or 6 Ah) for extended runtime. Make sure they are compatible with the MadMaxx series.
The chain brake is not working, what to do?
Do not use the saw. Check if the chain brake is properly engaged. If the problem persists, contact Batavia customer service for repair.
What is the recommended battery voltage?
The saw is designed for an 18 V battery from the MadMaxx series. Using a different voltage could damage the tool.
How to store the saw for winter?
Remove the battery, clean the saw, apply a thin layer of oil to the chain and guide bar, and store it in a dry, frost-free place.
Where to buy spare parts?
You can purchase spare parts (chain, guide bar, battery) on the official Batavia website or from authorized dealers. Always use original parts to ensure safety.
User questions about MadMaxx BT-CS004 Batavia
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Electric saw in PDF format for free! Find your manual MadMaxx BT-CS004 - Batavia and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MadMaxx BT-CS004 by Batavia.