50965 - Water pump WilTec - Free user manual and instructions
Find the device manual for free 50965 WilTec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Submersible Water Pump |
| Model | 50965 |
| Brand | WilTec |
| Power Supply | 220–240 V / 50 Hz |
| Power Consumption | 800 W |
| Max Flow Rate | 10,000 L/h |
| Max Head | 8 m |
| Inlet/Outlet Size | 1" (25 mm) female thread |
| Housing Material | Stainless Steel and Engineering Plastic |
| Protection Class | IPX8 |
| Max Liquid Temperature | 35 °C |
| Max Particle Size | 5 mm |
| Dimensions (L×W×H) | 20 × 15 × 30 cm |
| Weight | 4.5 kg |
| Cable Length | 10 m |
| Thermal Protection | Automatic shut-off on overheating |
| Float Switch | Integrated adjustable float switch |
| Maintenance | Clean inlet filter regularly; rinse with fresh water after use |
| Safety Features | Low water level protection; overheat protection |
| Spare Parts Available | Impeller, seal kit, float switch |
| Repairability | Designed for user service; replaceable parts available |
| Warranty | 2 years |
Frequently Asked Questions - 50965 WilTec
Can this pump run dry?
No, running dry can damage the pump. It has built-in low water protection, but it's best to avoid dry operation.
What is the maximum particle size the pump can handle?
The pump can handle particles up to 5 mm in diameter. Larger debris should be filtered out.
How do I install the float switch correctly?
Adjust the float switch cable length so that the switch turns off the pump before the water level falls below the intake. Ensure the switch moves freely.
What type of liquid can I use this pump for?
It is designed for clean or slightly dirty fresh water. Do not use for flammable, corrosive, or salt water.
Why does the pump not start?
Check power supply, reset thermal protection if triggered, ensure float switch is in 'ON' position, and verify water level is sufficient.
How often should I clean the pump?
After each use, especially if pumping dirty water. Periodically clean the impeller and inlet filter to maintain performance.
What does the thermal protection do?
If the motor overheats, the thermal switch cuts power to prevent damage. Once cooled, it resets automatically.
Can I use an extension cord?
Yes, but use a heavy-duty cord rated for at least 10 A and keep it as short as possible to avoid voltage drop.
What is the noise level?
This submersible pump operates at approximately 50 dB underwater, which is quieter above water due to muffling.
Where can I find spare parts?
Spare parts like impellers and seals are available from WilTec dealers or online stores. Use the model number 50965 when ordering.
User questions about 50965 WilTec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water pump in PDF format for free! Find your manual 50965 - WilTec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 50965 by WilTec.
USER MANUAL 50965 WilTec
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : WilTec
Model : 50965
Category : Water pump