51538 - Water pump WilTec - Free user manual and instructions
Find the device manual for free 51538 WilTec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Water Pump |
| Brand | WilTec |
| Model | 51538 |
| Power Consumption | 1500 W |
| Voltage | 220-240 V ~50 Hz |
| Max Flow Rate | 6000 L/h |
| Max Head | 8 m |
| Max Liquid Temperature | 35 °C |
| Inlet/Outlet Diameter | 1" (25 mm) |
| Protection Rating | IPX4 |
| Housing Material | Stainless Steel / Cast Iron |
| Impeller Material | Noryl / Brass |
| Cable Length | 10 m |
| Weight | 12.5 kg |
| Dimensions (L x W x H) | 350 x 200 x 250 mm |
| Self-Priming | Yes |
| Features | Thermal Overload Protection |
| Application | Garden irrigation, drainage, water transfer |
| Maintenance | Clean filter regularly, check seals |
| Safety | Do not run dry, use RCD |
| Spare Parts Available | Yes (seals, impeller, capacitor) |
| Repairability | Easy to disassemble, spare parts available |
Frequently Asked Questions - 51538 WilTec
How do I prime the WilTec 51538 water pump?
To prime the pump, fill the pump housing and suction line with water before starting. Open the priming plug, pour water until it overflows, then close the plug. Ensure no air remains in the system for proper operation.
Can the 51538 pump run continuously?
Yes, it is designed for continuous duty, but do not exceed the maximum liquid temperature of 35 °C. Allow the pump to cool down if it runs for extended periods at high load.
What types of liquids can be pumped?
This pump is suitable for clean water, rainwater, and lightly contaminated water. Do not use for flammable, corrosive, or abrasive liquids. Max particle size should be less than 1 mm.
What is the maximum suction depth?
The maximum suction depth is approximately 7 meters under ideal conditions. Ensure the suction hose is airtight and the foot valve is submerged.
How do I clean the pump?
Disconnect power, remove the inlet filter, and rinse with clean water. Use a soft brush to remove debris. Check the impeller and housing for blockages. Reassemble after drying.
Why is the pump not delivering water?
Common causes: air lock, clogged filter, blocked impeller, or insufficient power. Check the suction line for leaks, clean filter, and ensure the pump is primed. Verify voltage supply.
Is the pump protected against dry running?
No, the pump does not have a dry-run protection switch. Always ensure the pump is filled with water before operation to prevent damage to seals and impeller.
What safety precautions should I take?
Use a residual current device (RCD) with a rated leakage current of ≤30 mA. Do not operate in wet conditions. Ensure the electrical connection is grounded. Keep children away.
How noisy is the pump during operation?
The noise level is approximately 70 dB(A) at 1 meter. Place the pump on a vibration-dampening pad to reduce noise. Ensure it is on a stable surface.
How do I winterize the pump?
Drain all water from the pump and hoses before freezing temperatures. Remove the drain plug and tilt the pump to empty. Store indoors in a dry place.
User questions about 51538 WilTec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water pump in PDF format for free! Find your manual 51538 - WilTec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 51538 by WilTec.
USER MANUAL 51538 WilTec
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : WilTec
Model : 51538
Category : Water pump