SuperServer F618R2-FTPT+ - Server Supermicro - Free user manual and instructions
Find the device manual for free SuperServer F618R2-FTPT+ Supermicro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rackmount Server |
| Brand | Supermicro |
| Model | SuperServer F618R2-FTPT+ |
| Form Factor | 6U Rackmount |
| Processor | Dual Intel Xeon E5-2600 v3/v4 |
| Chipset | Intel C612 |
| Memory | Up to 2TB DDR4 ECC, 16 DIMM slots |
| Storage | 24x 2.5" Hot-Swap SATA/SAS drive bays |
| RAID Support | Hardware RAID (LSI 3108) |
| Network | 2x 10GbE + 2x 1GbE |
| Expansion Slots | 3x PCIe 3.0 x16 |
| Power Supply | Redundant 1600W Platinum (2+1) |
| Cooling | Hot-swap redundant fans (N+1) |
| Management | IPMI 2.0 with dedicated LAN |
| Dimensions (HxWxD) | 6.8 x 17.2 x 25.6 inches |
| Weight | ~75 lbs |
| Operating Temperature | 10°C to 35°C |
| Safety Certifications | FCC, UL, CE |
| Included Accessories | Power cables, rail kit |
| Maintenance | Hot-swap components, front access to drives |
| Repairability | Modular design, spare parts available |
Frequently Asked Questions - SuperServer F618R2-FTPT+ Supermicro
How do I install the server in a rack?
Use the included rail kit. Attach the rails to the server and rack posts, then slide the server in. Ensure proper airflow and secure with screws.
How to configure RAID?
Enter the RAID BIOS during boot (Ctrl+H or Ctrl+R). Create a virtual disk by selecting drives, RAID level (0,1,5,10), and stripe size. Save and exit.
How to reset the BMC/IPMI?
Press the IPMI reset button on the motherboard or use ipmitool mc reset cold via IPMI LAN. Alternatively, power cycle the server.
What type of memory is supported?
The server supports DDR4 ECC RDIMM and LRDIMM modules up to 2800MHz. Mixing types is not recommended.
How to update the BIOS?
Download the latest BIOS file from Supermicro support. Use the Flash utility via a bootable USB or the BMC web interface. Follow the instructions precisely.
What power cables are needed?
The server uses standard C19 to C20 power cables (high-current). Each PSU requires a separate 15A circuit. Use cables rated for 16A minimum.
How to access the management interface?
Connect to the dedicated IPMI LAN port. Assign an IP via DHCP or static. Access the web interface using a browser at https:// and log in with admin credentials.
What operating systems are supported?
The server supports Windows Server, Linux (Red Hat, Ubuntu, CentOS), and VMware ESXi. Check Supermicro's compatibility list for specific versions.
How to troubleshoot no power?
Verify power cables are connected and PSUs are seated. Check the AC source. Try a different power outlet. If using redundant PSUs, ensure at least one is connected. If still no power, the PSU or motherboard may be faulty.
How to replace a failed fan?
Unscrew the fan from the chassis. Disconnect the fan cable from the backplane. Install the new fan and reconnect. The fan is hot-swappable, so the server can remain on.
User questions about SuperServer F618R2-FTPT+ Supermicro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual SuperServer F618R2-FTPT+ - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SuperServer F618R2-FTPT+ by Supermicro.
USER MANUAL SuperServer F618R2-FTPT+ Supermicro
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Supermicro
Model : SuperServer F618R2-FTPT+
Category : Server