GS1350-12HP - Switch ZYXEL - Free user manual and instructions
Find the device manual for free GS1350-12HP ZYXEL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed L2 Gigabit PoE+ Switch |
| Model Number | GS1350-12HP |
| Brand | ZyXEL |
| Ports | 12x Gigabit Ethernet with PoE+ (8x PoE+ ports, 4x combo SFP slots) |
| PoE Budget | 240W total |
| Switching Capacity | 24 Gbps |
| Forwarding Rate | 17.86 Mpps |
| MAC Address Table | 16K entries |
| VLAN Support | 802.1Q VLAN, up to 256 groups |
| Layer 2 Features | STP, RSTP, MSTP, Link Aggregation, IGMP Snooping, MLD Snooping |
| Quality of Service (QoS) | 802.1p, DSCP, bandwidth control |
| Management | Web interface, CLI, SNMP v1/v2c/v3, SSH, SSL |
| Dimensions (W x D x H) | 330 mm x 230 mm x 44 mm (13.0 x 9.1 x 1.7 in) |
| Weight | 3.2 kg (7.1 lbs) |
| Power Supply | Internal, 100-240V AC, 50/60 Hz, max power consumption 300W |
| Cooling | Fan cooling (smart fan speed control) |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Certifications | CE, FCC, RoHS |
| Maintenance & Cleaning | Disconnect power, clean with dry soft cloth, avoid liquids |
| Safety Instructions | Use provided power cord, ensure proper grounding, do not block vents |
| Spare Parts & Repairability | Contact authorized ZyXEL service center; no user-serviceable parts inside |
Frequently Asked Questions - GS1350-12HP ZYXEL
How do I reset the GS1350-12HP to factory defaults?
Press and hold the Reset button on the front panel for at least 10 seconds until the Power LED flashes. The switch will reboot and load factory settings.
What is the maximum PoE power per port?
Each PoE+ port can deliver up to 30W (IEEE 802.3at), and total PoE budget is 240W. Ensure total load does not exceed budget.
How can I access the web management interface?
Connect a computer to any port, set IP to DHCP (or static 192.168.1.x/24), open browser and enter default IP 192.168.1.1. Login with default admin/admin.
Does this switch support VLANs?
Yes, it supports 802.1Q VLAN with up to 256 VLAN groups. You can configure port-based or tagged VLANs via the web interface or CLI.
What should I do if the switch is not powering on?
Check the power cord connection and wall outlet. Ensure the power supply voltage matches requirements (100-240V AC). If still off, contact ZyXEL support.
How do I update the firmware?
Download the latest firmware from ZyXEL's website. Go to Maintenance > Firmware Upgrade in the web interface, select the file, and click Upgrade. Do not power off during upgrade.
Can I use SFP modules in the combo ports?
Yes, the four combo ports support 1000BASE-SX/LX SFP modules. Note that each combo port shares with a copper port; use only one medium at a time.
What is the default console baud rate?
The console port uses 115200 bps (8 data bits, no parity, 1 stop bit). Use a serial cable with DB9 to RJ45 adapter.
How do I enable PoE on a port?
PoE is enabled by default. To disable or configure priority, go to PoE > Port Settings in the web interface. You can set scheduling or power limit per port.
What LED indicators mean?
Power: Solid green = normal. PoE: Green = port delivering power. Link/Act: Green = link established, flashing = activity. Refer to manual for more details.
User questions about GS1350-12HP ZYXEL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual GS1350-12HP - ZYXEL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GS1350-12HP by ZYXEL.
USER MANUAL GS1350-12HP ZYXEL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ZYXEL
Model : GS1350-12HP
Category : Switch