GIM-2 - Range hood Pando - Free user manual and instructions
Find the device manual for free GIM-2 Pando in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Pando |
| Model | GIM-2 |
| Product type | Kitchen hood |
| Power supply | 220-240 V ~ 50/60 Hz |
| Motor power | 200 W |
| Lighting | 2 LED bulbs, 3 W each |
| Filter type | Washable metal grease filter |
| Charcoal filter (optional) | Compatible model: Pando CF-1 |
| Number of speeds | 3 speeds + intensive |
| Max noise level | 65 dB(A) |
| Max airflow | 600 m³/h |
| Evacuation mode | External evacuation or recirculation with charcoal filter |
| Width | 60 cm |
| Depth | 50 cm |
| Height | 15 cm (built-in) |
| Chimney height | 60 - 110 cm adjustable |
| Net weight | 8.5 kg |
| Air outlet diameter | 150 mm |
| Energy class | A |
| Filter maintenance | Dishwasher cleaning every month |
| Charcoal filter replacement | Every 3 to 6 months depending on use |
| Safety | Automatic shutdown in case of overheating |
| Spare parts | Filters, bulbs, motor available |
| Warranty | 2 years |
Frequently Asked Questions - GIM-2 Pando
How to clean the grease filter of the Pando GIM-2 hood?
The metal grease filter can be cleaned in the dishwasher or by hand with hot water and detergent. It is recommended to clean it every month.
How to install the Pando GIM-2 hood in recirculation mode?
For recirculation mode, you need to purchase a charcoal filter (ref. Pando CF-1). Remove the grille, place the charcoal filter in the designated compartment, then replace the grille. No exhaust duct is required.
What is the lighting power of the GIM-2 hood?
The hood is equipped with 2 LED bulbs of 3 W each, providing efficient lighting of the cooking surface.
How to replace the LED bulb of the Pando GIM-2 hood?
Unplug the appliance, remove the lighting cover, unclip the defective bulb and insert a new LED bulb of type G4 (max 3 W). Replace the cover and plug back in.
Is the Pando GIM-2 hood noisy?
The maximum noise level is 65 dB(A) in intensive speed, equivalent to a normal conversation. At speed 1, the noise is below 50 dB(A).
What is the recommended installation height for the GIM-2 hood?
For electric cooking, install the hood at 65-75 cm above the hob. For gas cooking, allow 75-85 cm.
How to activate the intensive function on the Pando GIM-2 hood?
Press the Intensive button (usually marked with a turbine symbol) for 2 seconds. The hood operates at maximum power for 10 minutes and then automatically returns to the previous speed.
Can I use a longer exhaust duct than the one provided?
Yes, but avoid exceeding 3 meters and use rigid or semi-rigid ducts of 150 mm diameter. Bends reduce the airflow.
What to do if the hood does not turn on?
First check that the plug is properly connected and the circuit breaker has not tripped. If that does not solve the problem, contact Pando customer service.
Where to find spare parts for the Pando GIM-2 hood?
Spare parts (filters, bulbs, motor) are available on the official Pando website or from authorized dealers. Use the model reference GIM-2 to order.
User questions about GIM-2 Pando
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual GIM-2 - Pando and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GIM-2 by Pando.
USER MANUAL GIM-2 Pando
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Pando
Model : GIM-2
Category : Range hood