FD-100 - Battery charger ISDT - Free user manual and instructions
Find the device manual for free FD-100 ISDT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Battery Charger (LiPo, Li-ion, LiFe, NiMH, Pb) |
| Model | FD-100 |
| Brand | ISDT |
| Input Voltage | DC 6-32V (2A min) or USB-C PD (5-20V) |
| Output Voltage | 3.6V, 4.2V, 4.35V (Li-ion); 3.6V (LiFe); 1.2-1.5V (NiMH/NiCd); 2.0-2.4V (Pb) |
| Max Charge Current | 10A |
| Max Charge Power | 100W |
| Compatible Battery Cells | 1S (1 cell) |
| Display | 0.96 inch OLED |
| Dimensions (W x H x D) | 100 x 70 x 25 mm |
| Weight | 150 g |
| Operating Temperature | 0°C to 40°C |
| Protection Features | Reverse polarity, overheat, overcurrent, short circuit |
| Charge Modes | Balance charge, storage, discharge, cycle, fast charge |
| Maintenance | Clean with a soft dry cloth; avoid moisture and dust |
| Spare Parts Availability | Not available; unit is not user-serviceable |
| Safety Certifications | CE, FCC |
Frequently Asked Questions - FD-100 ISDT
What battery types can the FD-100 charge?
The FD-100 supports LiPo, Li-ion, LiFe, NiMH, NiCd, and Pb (lead-acid) batteries, each with appropriate voltage settings.
Can I charge a 2S battery with the FD-100?
No, the FD-100 is designed for 1S (single cell) batteries only. Attempting to charge multi-cell batteries will damage the charger or battery.
What is the maximum charge current?
The maximum charge current is 10A, provided your power source can supply sufficient voltage and current (min 6V DC or USB-C PD at 100W).
How do I connect the charger to a power source?
You can use a DC power supply (6-32V, min 2A) via the input terminals or a USB-C PD cable (5-20V, up to 100W). The charger auto-detects the input.
What does the OLED display show?
The OLED shows real-time voltage, current, capacity, charge time, and battery type. It also displays error messages if protections are triggered.
Is the FD-100 safe to leave unattended?
The charger has multiple protections (reverse polarity, overheat, overcurrent, short circuit) and will auto-shut off if an issue is detected. However, always monitor charging and avoid leaving it unattended for long periods.
Can I charge a LiFePO4 battery?
Yes, select the LiFe profile. The charger will output a full charge voltage of 3.6V per cell.
What does the 'Balance' mode do?
Balance mode ensures each cell in a multi-cell pack is charged to the same voltage. For 1S chargers like the FD-100, this mode is automatically applied when using the balance lead.
How do I clean the charger?
Disconnect all power and use a soft, dry cloth to wipe the exterior. Do not use liquids or abrasives. Keep ventilation openings free of dust.
Where can I find the user manual?
The user manual is available for free download in PDF format on notice-facile.com for the ISDT FD-100. You can also request a translated version via email.
User questions about FD-100 ISDT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Battery charger in PDF format for free! Find your manual FD-100 - ISDT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FD-100 by ISDT.
USER MANUAL FD-100 ISDT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ISDT
Model : FD-100
Category : Battery charger