HG04346A-BS - Cordless work light POWERFIX - Free user manual and instructions
Find the device manual for free HG04346A-BS POWERFIX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Multimeter |
| Brand | Powerfix |
| Model | HG04346A-BS |
| Dimensions (approx.) | 150 x 70 x 30 mm |
| Weight (approx.) | 200 g |
| Power Supply | 2 x AAA batteries (1.5 V) |
| Display | LCD, 2000 counts |
| DC Voltage Range | 200 mV – 600 V |
| AC Voltage Range | 200 mV – 600 V |
| Resistance Range | 200 Ω – 20 MΩ |
| Continuity Test | Yes, with buzzer |
| Diode Test | Yes |
| Safety Rating | CAT II 600 V |
| Overload Protection | Yes |
| Auto Power Off | Yes (approx. 15 min) |
| Accessories Included | Test leads, manual, batteries |
| Maintenance | Clean with dry cloth; remove batteries if not used for long |
| Spare Parts | Test leads available separately |
| Repairability | Not user-serviceable; contact support |
| Intended Use | Electrical measurements for DIY and light professional |
Frequently Asked Questions - HG04346A-BS POWERFIX
How do I measure DC voltage with the HG04346A-BS?
Set the rotary switch to the appropriate DCV range (e.g., 200 mV to 600 V). Connect the black lead to COM and red lead to V/Ω. Touch the probes to the circuit in parallel. Read the value on the LCD.
What does the continuity test do?
The continuity test checks if two points are electrically connected. Set the dial to the continuity symbol (usually a diode/sound wave). If the resistance is below ~30 Ω, the multimeter beeps.
Why does my multimeter show 'OL'?
'OL' means overload or open loop. It indicates that the measured value exceeds the selected range or the circuit is open. Try selecting a higher range or check connections.
Can I measure current with this multimeter?
This model likely does not have a dedicated current measurement function. Check the manual: if it has a mA or A setting, use it with caution. Otherwise, do not attempt to measure current directly.
How do I replace the batteries?
Turn off the multimeter. Remove the screw on the back cover. Open the battery compartment and replace the two AAA batteries with new ones, observing polarity. Close and screw back.
What safety precautions should I take?
Always start with the highest range. Do not measure voltages above 600 V. Use proper test leads. Ensure hands are dry. Follow CAT II safety guidelines for low-voltage installations.
How do I test a diode?
Set the dial to the diode symbol. Connect red lead to anode, black to cathode. The display shows forward voltage drop (e.g., 0.6V for silicon). Reverse leads should show 'OL'.
Can I use this multimeter for automotive diagnostics?
Yes, for basic checks like battery voltage (12V), sensor resistance, and continuity. However, for high-current circuits, use specialized tools. Ensure voltage does not exceed 600 V.
Why does the display turn off automatically?
The auto power off feature saves battery life. It activates after about 15 minutes of inactivity. To wake the meter, rotate the dial or press any button. You can disable it by holding the 'Hold' button while turning on.
What do the symbols on the dial mean?
Common symbols: V~ (AC voltage), V- (DC voltage), Ω (resistance), →+ (diode/continuity). The number indicates maximum range. Refer to the manual for exact markings.
User questions about HG04346A-BS POWERFIX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Cordless work light in PDF format for free! Find your manual HG04346A-BS - POWERFIX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HG04346A-BS by POWERFIX.
USER MANUAL HG04346A-BS POWERFIX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : POWERFIX
Model : HG04346A-BS
Category : Cordless work light