DS-KD9203-ME6 - Intercom Hikvision - Free user manual and instructions
Find the device manual for free DS-KD9203-ME6 Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Video Door Station |
| Brand | Hikvision |
| Model | DS-KD9203-ME6 |
| Dimensions (W x H x D) | 130 mm x 220 mm x 50 mm |
| Weight | 0.5 kg |
| Power Supply | 12 V DC or PoE (802.3af) |
| Video Resolution | 2 MP (1920 x 1080) |
| Viewing Angle | 130° horizontal |
| Audio | Two-way audio with echo cancellation |
| Door Unlock | Supports external lock release |
| Network Interface | 1 x RJ45 10/100 Mbps |
| Keypad | Touch keypad with backlight |
| Card Reader | Supports RFID cards (optional) |
| Indoor Station Support | Up to 2 indoor stations |
| Motion Detection | Yes |
| Night Vision | Built-in IR LEDs |
| Weatherproof Rating | IP65 |
| Operating Temperature | -30°C to 60°C |
| Maintenance | Clean with soft dry cloth; avoid water or solvents |
| Safety | Use only specified power supply; do not expose to rain |
| Spare Parts | Available through Hikvision authorized dealers |
| Repairability | Modular design; repair by qualified technicians |
| General Information | Compatible with Hikvision indoor stations DS-KH series |
Frequently Asked Questions - DS-KD9203-ME6 Hikvision
How do I connect the DS-KD9203-ME6 to my network?
Connect an Ethernet cable from the door station to your router or switch. Ensure PoE is available if not using separate power.
Can I use this door station with non-Hikvision indoor monitors?
No, this unit is designed to work with Hikvision indoor stations, typically the DS-KH series.
How do I unlock the door from the indoor station?
Press the unlock button on the indoor monitor or use the Hik-Connect mobile app when remote access is configured.
What is the default IP address of the door station?
The default IP address is 192.168.1.64. You can change it via the SADP tool or web interface.
Does the DS-KD9203-ME6 support night vision?
Yes, it has built-in IR LEDs for clear video in low-light conditions.
How do I reset the door station to factory settings?
Press and hold the reset button (located behind the front panel) for 10 seconds until the device restarts.
What is the maximum distance for the wiring?
For Ethernet, the maximum cable length is 100 meters. For power, follow PoE standards.
Can I integrate the door station with a third-party alarm system?
Integration is possible via open protocols like ONVIF or through Hikvision's ISAPI. Check compatibility with your alarm system.
How do I update the firmware?
Download the latest firmware from Hikvision's website, then upload it via the web interface under System > Maintenance.
The device shows 'No Signal' on the indoor monitor. What should I do?
Check the Ethernet connection and ensure both devices are on the same network. Verify the IP address settings and restart both devices.
User questions about DS-KD9203-ME6 Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Intercom in PDF format for free! Find your manual DS-KD9203-ME6 - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-KD9203-ME6 by Hikvision.
USER MANUAL DS-KD9203-ME6 Hikvision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hikvision
Model : DS-KD9203-ME6
Category : Intercom