SC-SS0008-3P - Sauna SteamSpa - Free user manual and instructions
Find the device manual for free SC-SS0008-3P SteamSpa in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | SteamSpa |
| Model | SC-SS0008-3P |
| Product Type | Steam Sauna |
| Dimensions (Approx.) | 100 x 100 x 190 cm (39 x 39 x 75 in) |
| Weight (Approx.) | 150 kg (330 lbs) |
| Power Supply | 220-240V, 50/60 Hz, 3000W |
| Steam Generator Capacity | 3 kW, stainless steel |
| Maximum Temperature | 60°C (140°F) |
| Timer Range | 0-60 minutes |
| Control Panel | Digital touch control with LED display |
| Material | Canadian hemlock wood panels |
| Seating Capacity | 3 persons |
| Lighting | Interior LED chromotherapy light |
| Installation Type | Indoor, plug-in or hardwired |
| Maintenance | Regular descaling and cleaning of steam generator |
| Safety Features | Overheat protection, GFCI plug, auto shut-off |
| Spare Parts Available | Heating element, control board, steam nozzle |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - SC-SS0008-3P SteamSpa
How do I clean the steam sauna?
Wipe the interior with a damp cloth after each use. For the steam generator, use a descaling solution every 3 months to prevent mineral buildup.
What is the recommended installation clearance?
Leave at least 5 cm (2 inches) of clearance on all sides for proper ventilation and access to electrical connections.
Can I use essential oils in the steam generator?
No, do not add any oils or additives. Only use clean water to avoid damaging the generator and voiding the warranty.
How long does it take to heat up?
Typically about 15-20 minutes to reach the maximum temperature of 60°C (140°F), depending on ambient conditions.
What type of water should I use?
Use distilled or demineralized water to reduce mineral deposits and extend the life of the steam generator.
Does the sauna have an automatic shut-off?
Yes, the unit features an automatic shut-off after the set timer expires or if overheating is detected.
Can I install it outdoors?
This sauna is designed for indoor use only. Installing outdoors without proper shelter may damage the electrical components.
How do I set the timer?
Press the Timer button on the control panel and use the +/- buttons to select a duration from 1 to 60 minutes.
What should I do if the sauna does not heat?
First, ensure the GFCI plug is not tripped. If it continues, check if the water tank is filled and the unit is powered on. For persistent issues, contact support.
Is the chromotherapy light replaceable?
Yes, the LED light module can be replaced. Contact SteamSpa customer service for the correct part and installation instructions.
User questions about SC-SS0008-3P SteamSpa
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sauna in PDF format for free! Find your manual SC-SS0008-3P - SteamSpa and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SC-SS0008-3P by SteamSpa.
USER MANUAL SC-SS0008-3P SteamSpa
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SteamSpa
Model : SC-SS0008-3P
Category : Sauna