SWP1-16MMF - Switch YAMAHA - Free user manual and instructions
Find the device manual for free SWP1-16MMF YAMAHA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Switch |
| Model | SWP1-16MMF |
| Brand | Yamaha |
| Number of Ports | 16 x Gigabit Ethernet |
| Form Factor | Rack-mountable (1U) |
| Dimensions (W x D x H) | 440 x 200 x 44 mm |
| Weight | 2.5 kg |
| Power Supply | AC 100-240V, 50/60Hz, internal |
| Power Consumption | 20W (max) |
| Switching Capacity | 32 Gbps |
| MAC Address Table Size | 8K entries |
| Management | Web GUI, SNMP, CLI |
| VLAN Support | Yes (802.1Q) |
| Quality of Service (QoS) | Yes |
| Link Aggregation | Yes (LACP) |
| Fan | Yes, internal |
| Operating Temperature | 0°C to 40°C |
| LED Indicators | Power, Link/Activity per port |
| Safety Certifications | CE, FCC |
| Maintenance | Clean with a dry, soft cloth |
| Repairability | Contact authorized service center |
| Warranty | 2 years |
Frequently Asked Questions - SWP1-16MMF YAMAHA
How do I reset the Yamaha SWP1-16MMF to factory defaults?
Press and hold the Reset button on the front panel for 10 seconds until the Power LED blinks. The switch will reboot with factory settings.
Can this switch be mounted in a rack?
Yes, the SWP1-16MMF is designed for 1U rack-mounting. Rack ears are included for installation in a standard 19-inch rack.
What is the default IP address for management?
The default IP address is 192.168.1.1. You can access the web interface via a browser after connecting to a port.
Does this switch support Power over Ethernet (PoE)?
No, the SWP1-16MMF is a non-PoE switch. It does not provide power to connected devices via Ethernet cables.
How can I update the firmware?
Download the latest firmware from Yamaha's support website, then upload it via the Firmware Upgrade page in the web interface. Do not power off during the update.
What type of cables should I use?
Use Cat5e or Cat6 Ethernet cables for gigabit connections. Shielded cables are recommended in high-interference environments.
Can I configure VLANs on this switch?
Yes, the switch supports 802.1Q VLAN configuration via the web interface or CLI. Up to 256 VLANs can be created.
What does the 'Link/Act' LED indicate?
Solid green indicates a link is established; blinking green indicates activity (data transmission). No light means no link.
Is the switch fan noisy?
The internal fan runs at a constant speed and produces a low noise level, typically 30 dB. It is suitable for office environments.
How do I troubleshoot connectivity issues?
Check cable connections, verify the Link/Act LED, ensure the switch and device are on the same VLAN, and test with a known working cable.
User questions about SWP1-16MMF YAMAHA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual SWP1-16MMF - YAMAHA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SWP1-16MMF by YAMAHA.
USER MANUAL SWP1-16MMF YAMAHA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : YAMAHA
Model : SWP1-16MMF
Category : Switch