NTL4T20-FS40 - Heating Nobo - Free user manual and instructions
Find the device manual for free NTL4T20-FS40 Nobo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Convector Heater |
| Brand | Nobo |
| Model | NTL4T20-FS40 |
| Power Source | Mains Electricity |
| Power Consumption | 2000 W |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Heating Elements | Ceramic PTC |
| Dimensions (W x H x D) | 40 x 20 x 15 cm |
| Weight | 2.5 kg |
| Thermostat | Adjustable, built-in |
| Overheat Protection | Yes |
| Tip-Over Switch | Yes |
| Energy Efficiency Class | Class A |
| Noise Level | < 40 dB |
| Timer Function | 24-hour programmable timer |
| Frost Protection | Yes |
| Remote Control | Included |
| Mounting | Free-standing or wall-mounted (brackets included) |
| Color | White |
| Material | Steel and plastic |
| Warranty | 2 years |
Frequently Asked Questions - NTL4T20-FS40 Nobo
How do I clean the Nobo NTL4T20-FS40 heater?
Unplug the heater and allow it to cool. Use a soft, damp cloth to wipe the exterior. Do not use abrasive cleaners or immerse in water.
Can I use this heater in a bathroom?
The NTL4T20-FS40 is not specified for bathroom use. It should be used in dry areas only unless it has an IP rating for moisture.
Does the heater have an overheat protection feature?
Yes, it includes an automatic overheat protection system that shuts off the heater if it exceeds a safe temperature.
How do I set the timer?
Press the timer button and use the +/- buttons to set the desired on/off times. Refer to the manual for detailed instructions.
What is the recommended room size for this heater?
The heater is suitable for rooms up to 20-25 m², depending on insulation. It provides 2000W of heating power.
Can I mount this heater on the wall?
Yes, the heater comes with wall-mounting brackets. Ensure it is securely attached and follow the installation instructions.
Is the remote control included?
Yes, a remote control is included for convenient operation from a distance.
How do I activate the frost protection mode?
Press the frost protection button (usually a snowflake icon) on the control panel or remote. The heater will maintain a minimum temperature to prevent freezing.
What should I do if the heater doesn't turn on?
Check the power cord and plug, ensure the thermostat is set above room temperature, and verify the circuit breaker hasn't tripped. If it still doesn't work, contact customer support.
How do I change the batteries in the remote?
Open the battery compartment on the back of the remote and replace the two AAA batteries with new ones, observing polarity.
User questions about NTL4T20-FS40 Nobo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual NTL4T20-FS40 - Nobo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NTL4T20-FS40 by Nobo.