16-50 - Receiver SONANCE - Free user manual and instructions
Find the device manual for free 16-50 SONANCE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Multi-Zone Audio/Video Receiver |
| Brand | Sonance |
| Model | 16-50 |
| Dimensions (W x H x D) | 17.0 x 3.5 x 12.0 inches |
| Weight | 12.5 lbs |
| Power Supply | AC 120V, 60Hz |
| Power Consumption | 350W (standby <1W) |
| Amplifier Power Output | 50W per channel (8Ω, 20Hz-20kHz, THD 0.05%) |
| Number of Channels | 6 |
| Impedance | 8Ω (compatible 4Ω) |
| Frequency Response | 20Hz - 20kHz ±1dB |
| Total Harmonic Distortion | <0.05% |
| Signal-to-Noise Ratio | 100dB (A-weighted) |
| Audio Inputs | 4 x RCA, 2 x Optical, 1 x Coaxial, 1 x Bluetooth |
| Audio Outputs | 6 x Speaker (binding posts), 1 x Subwoofer Pre-out, 1 x Headphone |
| Video Inputs | 2 x HDMI (ARC), 1 x Component, 1 x Composite |
| Video Outputs | 1 x HDMI (ARC), 1 x Composite |
| Supported Audio Formats | Dolby Digital, DTS, PCM up to 192kHz/24-bit |
| Multi-Zone Support | 2 independent zones |
| Control Options | IR, RS-232, 12V trigger, Ethernet, Web UI |
| Wireless Connectivity | Bluetooth 5.0, Wi-Fi (optional external dongle) |
| Speaker Impedance per Channel | 8Ω (minimum 4Ω) |
| Operating Temperature | 32°F - 104°F (0°C - 40°C) |
| Certifications | FCC, CE, RoHS |
Frequently Asked Questions - 16-50 SONANCE
How do I connect the Sonance 16-50 receiver to my TV?
Use an HDMI cable from the TV's HDMI ARC port to the receiver's HDMI ARC input. Ensure both devices are set to ARC mode. Alternatively, use optical or RCA audio cables if HDMI is not available.
Can I use the 16-50 with 4-ohm speakers?
Yes, the receiver is rated for 4-ohm speakers, but power output will be reduced. Ensure proper ventilation to avoid overheating.
How do I set up multi-zone audio?
Connect speakers for Zone 2 to the corresponding speaker terminals. Use the receiver's web interface or front panel to assign input sources to each zone independently.
What is the maximum Bluetooth range?
The Bluetooth range is approximately 30 feet (10 meters) in open space. Walls and obstacles may reduce range.
Why is there no sound from my speakers?
Check that the correct input source is selected and volume is turned up. Verify speaker connections are secure. Ensure the receiver is not in mute or standby mode.
Can I control the receiver with my smartphone?
Yes, use the Sonance App available for iOS and Android to control the receiver over Wi-Fi or Bluetooth. Requires network connection.
How do I perform a factory reset?
With the receiver powered on, press and hold the 'Menu' button for 10 seconds until the display shows 'Factory Reset'. Confirm with the 'Enter' button.
What is the recommended ventilation space?
Allow at least 4 inches of clearance above and 2 inches on sides for proper airflow. Do not place in enclosed cabinets without ventilation.
Can I connect a turntable to this receiver?
Yes, use the RCA phono input. If your turntable has a built-in preamp, use any line-level analog input. Otherwise, ensure the phono input is selected.
How do I update the firmware?
Download the latest firmware from Sonance's support website. Connect the receiver to your network via Ethernet, then access the web UI and follow the update instructions.
User questions about 16-50 SONANCE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual 16-50 - SONANCE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 16-50 by SONANCE.
USER MANUAL 16-50 SONANCE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SONANCE
Model : 16-50
Category : Receiver