H170 Pro4/D3 - Motherboard ASROCK - Free user manual and instructions
Find the device manual for free H170 Pro4/D3 ASROCK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Motherboard |
| Brand | ASRock |
| Model | H170 Pro4/D3 |
| Socket | LGA1151 |
| Chipset | Intel H170 |
| Memory Support | DDR3/DDR3L, 4 slots, up to 32GB, max 3200+ MHz (OC) |
| Form Factor | ATX (12.0 x 9.6 in / 30.5 x 24.4 cm) |
| Audio | 7.1 CH HD Audio with Realtek ALC892 |
| LAN | Gigabit LAN (Intel I219V) |
| PCI Express Slots | 1 x PCIe 3.0 x16, 1 x PCIe 3.0 x16 (x4), 2 x PCIe 3.0 x1, 2 x PCI |
| Storage Interfaces | 6 x SATA3 (6.0 Gb/s), 1 x M.2 (PCIe Gen3 x4 & SATA) |
| USB Ports (Rear) | 1 x USB 3.1 Gen2 Typ-C, 1 x USB 3.1 Gen2 Typ-A, 6 x USB 3.1 Gen1, 2 x USB 2.0 |
| Video Outputs | 1 x D-Sub, 1 x DVI-D, 1 x HDMI, 1 x DisplayPort |
| Power Connectors | 24-pin ATX, 8-pin CPU |
| Weight | Approx. 0.8 kg (1.76 lbs) |
| Operating Temperature | 0°C to 60°C |
| Maintenance | Clean with dry cloth; avoid liquids and strong solvents |
| Safety Precautions | Handle by edges; use anti-ESD wrist strap; power off before installation |
| Spare Parts / Repairability | Not user-serviceable; contact ASRock support for replacement |
| Warranty | Typical 3 years (check local regulations) |
Frequently Asked Questions - H170 Pro4/D3 ASROCK
What processors are compatible with the ASRock H170 Pro4/D3?
The motherboard supports Intel Core i7/i5/i3, Pentium, and Celeron processors in the LGA1151 socket (Skylake-S) with TDP up to 95W. Some Kaby Lake CPUs may require a BIOS update.
Can I use DDR4 memory on this board?
No, the H170 Pro4/D3 supports only DDR3/DDR3L memory modules. It does not support DDR4.
How can I update the BIOS?
Download the latest BIOS from ASRock's website, save it to a USB drive, and use the Instant Flash utility in the BIOS setup. Alternatively, use the ASRock App Store tool in Windows.
Does the motherboard support dual graphics cards?
It supports AMD CrossFireX with two PCIe x16 slots (one running at x16, the other at x4). NVIDIA SLI is not supported.
What is the maximum RAM capacity?
The board has four DDR3 slots and supports up to 32 GB total when using 8 GB modules. ECC memory is not supported.
How do I connect the front panel audio?
Connect the HD Audio cable from your case to the HD_AUDIO1 header on the motherboard. The pinout is standard; refer to the manual for precise location.
Is the M.2 slot SATA or PCIe?
The M.2 slot supports both PCIe Gen3 x4 and SATA modes. It can accommodate M.2 SSDs of type 2242/2260/2280.
Why is my system not booting?
Check that the 24-pin ATX and 8-pin CPU power connectors are firmly attached. Ensure the CPU cooler is correctly installed and the RAM is fully seated. Clear CMOS by shorting the CLRCMOS jumper if needed.
Can I use a standard ATX case?
Yes, the H170 Pro4/D3 is an ATX form factor motherboard (30.5 x 24.4 cm) and fits most standard ATX cases.
How do I enable XMP for my memory?
Enter BIOS by pressing F2 or Del during boot. Go to the OC Tweaker tab, find DRAM XMP Setting, and enable it. The board supports XMP to run memory at rated speeds up to 3200+ MHz (OC).
User questions about H170 Pro4/D3 ASROCK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Motherboard in PDF format for free! Find your manual H170 Pro4/D3 - ASROCK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. H170 Pro4/D3 by ASROCK.
USER MANUAL H170 Pro4/D3 ASROCK
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ASROCK
Model : H170 Pro4/D3
Category : Motherboard