East Beast - Synthesizer Cre8audio - Free user manual and instructions
Find the device manual for free East Beast Cre8audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Semi-Modular Analog Synthesizer |
| Brand | Cre8audio |
| Model | East Beast |
| Dimensions (W x D x H) | 30.5 cm x 18.4 cm x 9.1 cm (12 in x 7.25 in x 3.6 in) |
| Weight | 1.1 kg (2.4 lbs) |
| Power Supply | 12V DC, 500mA center positive (2.1mm barrel) |
| Oscillator | 1x CEM3340 VCO with saw, pulse, and PWM |
| Filter | 4-pole low-pass VCF with resonance (Moog-style) |
| Envelope | 1x ADSR envelope generator |
| LFO | 1x LFO with triangle, square, and sample & hold |
| Patch Points | 26 x 3.5mm Eurorack compatible |
| Sequencer | Built-in 8-step sequencer with CV and gate out |
| Effects | None (dry signal) |
| Audio I/O | 1x 3.5mm mono line out, 1x 3.5mm headphone out |
| MIDI | MIDI In via 3.5mm TRS (Type A) |
| USB | USB-C for firmware updates (data only) |
| Maintenance | Wipe with a dry cloth; avoid liquids |
| Safety | Use only supplied power adapter; do not open case |
| Repairability | Contact Cre8audio support; no user-serviceable parts |
| General Information | Compatible with Eurorack cases; semi-modular design |
Frequently Asked Questions - East Beast Cre8audio
What power supply do I need for the East Beast?
The East Beast requires a 12V DC, 500mA center positive power adapter with a 2.1mm barrel connector. Use only the supplied adapter to avoid damage.
Can I integrate the East Beast into a Eurorack system?
Yes, the East Beast is semi-modular and has 26 patch points that are Eurorack compatible (3.5mm, 1V/oct). You can connect it to other Eurorack modules for expanded capabilities.
Does the East Beast have presets or patch memory?
No, the East Beast is fully analog and does not store patches. You must manually set knobs each time. Use photos or patch sheets to recall settings.
How do I use the built-in sequencer?
The sequencer has 8 steps. Press Step buttons to set pitch (via VCO) and gate length. Connect the Seq CV and Gate outputs to control other modules or internal routing.
What type of MIDI does the East Beast use?
It uses 3.5mm TRS MIDI In (Type A). You need a standard 5-pin DIN to 3.5mm TRS adapter (Type A) to connect to traditional MIDI gear.
Can I use the East Beast as a standalone synth without a computer?
Yes, the East Beast is fully standalone. It has a headphone output and built-in speaker, so you can play it without external speakers.
How do I clean the East Beast?
Disconnect power and wipe the surface with a soft, dry cloth. Do not use liquids, alcohol, or abrasive cleaners.
What is the warranty for the East Beast?
Cre8audio offers a 1-year limited warranty covering defects in materials and workmanship. Retain your purchase receipt for claims.
Can I update the firmware?
Yes, connect via USB-C to a computer and use the Cre8audio updater tool. Firmware updates can fix bugs or add features.
What type of patch cables should I use?
Use standard 3.5mm mono patch cables (TS). Ensure they fit snugly. Avoid using TRS stereo cables as they may cause grounding issues.
User questions about East Beast Cre8audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Synthesizer in PDF format for free! Find your manual East Beast - Cre8audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. East Beast by Cre8audio.
USER MANUAL East Beast Cre8audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Cre8audio
Model : East Beast
Category : Synthesizer