Function Junction - Synthesizer Cre8audio - Free user manual and instructions
Find the device manual for free Function Junction Cre8audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Eurorack Synthesizer Module |
| Brand | Cre8audio |
| Model | Function Junction |
| Width (HP) | 10 HP |
| Depth | 30 mm |
| Weight | 150 g |
| Power Supply | +12V / -12V via Eurorack bus |
| Power Consumption | +12V: 50 mA, -12V: 20 mA |
| Main Functions | Envelope Generator, LFO, Attenuverter, Offset Generator |
| Controls | Rotary knobs, toggle switches, CV inputs |
| Inputs | CV Input (3), Gate Input (1) |
| Outputs | CV Output (3), Gate Output (1) |
| CV Range | 0V to +10V (typical) |
| Envelope Time Range | 1 ms to 10 s |
| LFO Frequency Range | 0.1 Hz to 100 Hz |
| Construction | PCB with aluminum front panel |
| Maintenance | Clean with dry cloth; avoid liquids |
| Safety | Use only with Eurorack case; reverse polarity protection |
| Reparability | Replacement parts available; DIY friendly |
Frequently Asked Questions - Function Junction Cre8audio
What is the Function Junction module used for?
The Function Junction is a utility module that can function as an envelope generator, LFO, attenuverter, and offset generator. It provides versatile control voltage processing for your Eurorack system.
How do I power the Function Junction?
Connect the included ribbon cable to your Eurorack case's power bus board, aligning the red stripe with -12V. It requires +12V (50mA) and -12V (20mA).
What are the CV inputs on the module?
There are three CV inputs (marked 1, 2, 3) and one gate input. Each can modulate parameters like time, shape, or amplitude depending on the mode.
How can I use it as an LFO?
Toggle the mode switch to LFO position. Adjust the rate knob to set frequency, and use the shape knob to morph between triangle, sawtooth, and square waves.
How do I create an envelope?
Set the mode to ENV. Connect a gate signal to the gate input. The attack and decay knobs control the shape. The envelope is output on the main output.
What is the attenuverter function?
The module can invert and scale CV signals. Use the attenuverter knob on an input channel to adjust level and polarity before sending to the output.
Can I chain multiple Function Junctions?
Yes, you can cascade outputs to inputs for more complex modulation. The CV outputs can be patched to other modules or additional Function Junctions.
What is the maximum voltage output?
The outputs typically swing from 0V to +10V for envelopes and LFOs, and +/-5V for attenuverter offsets.
How do I clean the module?
Disconnect power, then wipe the front panel with a soft dry cloth. Avoid using liquids or abrasive cleaners to prevent damage.
Where can I find replacement knobs or jacks?
Contact Cre8audio support or visit their website for replacement parts. Many parts are standard and can be sourced from electronics retailers.
User questions about Function Junction Cre8audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Synthesizer in PDF format for free! Find your manual Function Junction - Cre8audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Function Junction by Cre8audio.
USER MANUAL Function Junction Cre8audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Cre8audio
Model : Function Junction
Category : Synthesizer