WS-7034U-IT - Thermometer LA CROSSE TECHNOLOGY - Free user manual and instructions
Find the device manual for free WS-7034U-IT LA CROSSE TECHNOLOGY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Thermometer |
| Brand | La Crosse Technology |
| Model | WS-7034U-IT |
| Color | White/Black |
| Display Type | LCD |
| Indoor Temperature Range | 32°F to 122°F (0°C to 50°C) |
| Outdoor Temperature Range (Remote Sensor) | -40°F to 140°F (-40°C to 60°C) |
| Temperature Accuracy | ±1°F (0.5°C) within range |
| Wireless Range | Up to 300 feet (91 meters) open air |
| Transmission Frequency | 433 MHz |
| Update Interval | Every 4 seconds (indoor), every 60 seconds (outdoor) |
| Memory | MIN/MAX temperature records |
| Power Source (Display Unit) | 2 x AAA alkaline batteries (not included) |
| Power Source (Remote Sensor) | 2 x AAA alkaline batteries (not included) |
| Dimensions (Display Unit) | 3.5 x 1.0 x 2.5 inches |
| Dimensions (Remote Sensor) | 1.6 x 0.8 x 3.0 inches |
| Weight (Display Unit) | 0.2 lbs (90 g) |
| Weight (Remote Sensor) | 0.1 lbs (45 g) |
| Mounting | Table stand or wall mount for display; wall mount for sensor |
| Low Battery Indicator | Yes (on both units) |
| Cleaning | Wipe with soft, dry cloth; avoid water contact |
| Safety Warnings | Keep away from heat sources and moisture; do not mix old and new batteries |
| Warranty | 1 year limited |
Frequently Asked Questions - WS-7034U-IT LA CROSSE TECHNOLOGY
How do I reset the thermometer to factory settings?
Press and hold the SET button for 10 seconds. The display will show all segments briefly, indicating a reset. Remove batteries if needed for a hard reset.
How do I synchronize the remote sensor with the display unit?
Insert batteries into the remote sensor first, then into the display unit. Wait up to 3 minutes for synchronization. If no signal, press and hold the TX button on the sensor for 3 seconds.
What type of batteries should I use?
Use fresh AAA alkaline batteries (not rechargeable). Do not mix old and new batteries or different brands.
Why is the outdoor temperature showing dashes or no signal?
Check that the remote sensor is within 300 feet of the display and not obstructed. Replace batteries if low. Also ensure the sensor is not placed near metal or interference sources.
Can I use more than one remote sensor with this thermometer?
No, this model supports only one remote sensor. For multiple sensors, consider a different model.
How do I read the MIN/MAX temperature records?
Press the MIN/MAX button to cycle through the minimum and maximum indoor and outdoor temperatures. Hold the button for 3 seconds to clear records.
Why is the indoor temperature inaccurate?
Ensure the display is placed away from drafts, direct sunlight, and heat sources. Allow 1 hour for stabilization after placement.
What is the battery life for both units?
Battery life is approximately 12-18 months with regular use. Low battery icon appears when replacement is needed.
How do I mount the remote sensor outdoors?
Use the provided bracket and screws to attach the sensor under an eave or in a shaded area. Avoid direct rain and sunlight for accurate readings.
Can I clean the display with water?
No, use a soft, dry cloth. Do not use water, solvents, or abrasive cleaners. For stubborn dirt, lightly dampen the cloth with water and wipe, then dry immediately.
User questions about WS-7034U-IT LA CROSSE TECHNOLOGY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Thermometer in PDF format for free! Find your manual WS-7034U-IT - LA CROSSE TECHNOLOGY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WS-7034U-IT by LA CROSSE TECHNOLOGY.