LA CROSSE TECHNOLOGY

104-1534M - Thermometer LA CROSSE TECHNOLOGY - Free user manual and instructions

Find the device manual for free 104-1534M LA CROSSE TECHNOLOGY in PDF.

📄 2 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice LA CROSSE TECHNOLOGY 104-1534M - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeWireless Thermometer
Model Number104-1534M
BrandLa Crosse Technology
Display TypeLCD
Temperature Range (Indoor)32°F to 140°F (0°C to 60°C)
Temperature Range (Outdoor Sensor)-40°F to 140°F (-40°C to 60°C)
Transmission RangeUp to 330 feet (100 meters) open air
Power Source (Display)2 AA batteries (not included)
Power Source (Sensor)2 AA batteries (not included)
Number of Outdoor Sensors SupportedUp to 3 (sold separately)
Dimensions (Display)3.5 x 1.2 x 6.5 inches (8.9 x 3.0 x 16.5 cm)
Weight (Display)4.8 oz (136 g)
Mounting OptionDesk stand or wall mount
Temperature Display°F or °C selectable
Min/Max MemoryRecords daily min and max temperatures
Outdoor SensorWireless, weather-resistant
Signal IndicatorIcon shows sensor reception status
Low Battery IndicatorDisplay shows low battery for main unit and sensor
CleaningWipe with soft dry cloth; no abrasive cleaners
StorageStore in cool, dry place away from direct sunlight

Frequently Asked Questions - 104-1534M LA CROSSE TECHNOLOGY

How do I set up the La Crosse Technology 104-1534M thermometer?
Insert batteries into the display and outdoor sensor. Place the sensor outdoors within 330 feet of the display. The display will automatically sync. Press the SET button to configure time and temperature units.
What does the blinking signal icon on the display mean?
A blinking icon indicates loss of signal from the outdoor sensor. Check that the sensor is within range and batteries are fresh. Move the sensor closer to the display if necessary.
How do I switch between Fahrenheit and Celsius?
Press and hold the SET button for 3 seconds to enter settings. Use the +/- buttons to toggle between °F and °C. Press SET to confirm and exit.
Can I add more than one outdoor sensor?
Yes, the display supports up to 3 sensors. Each sensor must be set to a different channel (1, 2, or 3) via a switch inside the battery compartment. Follow the manual for channel setup.
What batteries does the thermometer use?
Both the display and the outdoor sensor require 2 AA alkaline batteries each. Batteries are not included. Do not use rechargeable batteries as they may not provide sufficient power.
How often does the display update the temperature?
The indoor temperature updates every 30 seconds. The outdoor sensor transmits data every 60 seconds. The display refreshes accordingly.
What is the maximum transmission range?
The outdoor sensor can transmit up to 330 feet (100 meters) in open air. Walls, metal, and other obstacles may reduce the range. Place the sensor near a window for best reception.
How do I reset the thermometer?
Remove batteries from both the display and sensor. Wait 10 seconds, then reinsert batteries. This will reset and resync the system. You may need to reset the time and units afterward.
Why is the outdoor temperature not displaying?
Ensure the sensor is powered and within range. Check that the batteries are installed correctly. Try resetting the system. If the issue persists, the sensor may be defective or need replacing.
Can the outdoor sensor be used in rain or snow?
Yes, the sensor is weather-resistant but not waterproof. It is designed for outdoor use but should be placed under an eave or sheltered from direct heavy rain. Avoid submerging in water.

User questions about 104-1534M LA CROSSE TECHNOLOGY

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Thermometer in PDF format for free! Find your manual 104-1534M - LA CROSSE TECHNOLOGY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 104-1534M by LA CROSSE TECHNOLOGY.

USER MANUAL 104-1534M LA CROSSE TECHNOLOGY

Mounting Location Outdoors

For accurate temperature measurements:

  • Choose a location that is not subject to direct weather elements.
  • Place on the North side of a building or in a different shady location.
  • Direct sunlight will cause your thermometer to read high.
  • Hang on the wall from a nail, peg or hook with the built in key hole.

Key Hider Compartment

- Store your spare keys in the secret key hider compartment on the back of your thermometer.

Warranty & Support

La Crosse McCormick, LLC. provides a 2-year limited warranty (from the date of the original consumer purchase), on this product against manufacturing defects in materials and workmanship. Send \$5.00 with date and proof of purchase to the following address. Please include the model number of your product and your complete address and phone number.

La Crosse McCormick Warranty Department 2830 26th St. St. La Crosse, WI 54601.

www.lacrossetechnology.com/support

Specifications

Temperature range: -60°F to 120°F

Dimensions: 13.5" Diameter x 1.5" Deep

WARNING: This product can expose you to chemicals including styrene, which is known in the State of California to cause cancer. For more information go to: https://www.p65warnings.ca.gov/

Made in China - Printed in China

Table of contents Click a title to access it
Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : LA CROSSE TECHNOLOGY

Model : 104-1534M

Category : Thermometer