VIVREAU Extra - Water dispenser BRITA - Free user manual and instructions
Find the device manual for free VIVREAU Extra BRITA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Water dispenser with filtration |
| Brand | BRITA |
| Model | VIVREAU Extra |
| Dimensions (H x W x D) | 50 cm x 30 cm x 30 cm |
| Weight | 8.5 kg |
| Power Supply | 220-240 V, 50/60 Hz, 500 W |
| Water Capacity | Cold water: 5 L, Hot water: 2 L |
| Filtration Technology | BRITA MAXTRA+ cartridge |
| Temperature Settings | Cold, ambient, and hot (85-95°C) |
| Key Functions | Filtered cold and hot water dispensing |
| Child Safety Lock | Yes, on hot water button |
| Auto Shut-off | After 2 hours of inactivity |
| Filter Replacement Indicator | Yes, electronic display |
| Filter Life | Approximately 4 weeks or 150 L |
| Cleaning | Wipe exterior with damp cloth; descale every 3 months |
| Spare Parts | Drip tray, filter cartridges, water tank |
| Repairability | Replaceable components; service by authorized technicians |
| Certifications | CE, WEEE, ROHS |
Frequently Asked Questions - VIVREAU Extra BRITA
How do I install the BRITA VIVREAU Extra?
Place the dispenser on a flat surface, plug it in, insert a new BRITA MAXTRA+ filter cartridge, and run water through until it stops flowing. Wait for the filter to activate (about 2 minutes) before first use.
How often should I change the filter?
Replace the BRITA MAXTRA+ cartridge every 4 weeks or after 150 liters of use, whichever comes first. The indicator will remind you.
Can I dispense both hot and cold water?
Yes, the VIVREAU Extra has separate buttons for cold (chilled) and hot (boiling) water. Use the child lock for hot water safety.
Why is my water not cold enough?
Check if the cooling function is on (LED indicator). Ensure the ventilation slots are clear and the ambient temperature is below 30°C. If persistent, contact support.
How do I clean the dispenser?
Unplug the unit. Wipe the exterior with a soft damp cloth. For descaling, use a BRITA descaling solution every 3 months. Remove and wash the drip tray regularly.
What does the error code E1 mean?
E1 indicates a problem with the water tank. Remove the tank, clean the float valve, and reinsert. If the error persists, replace the tank or contact service.
Is the dispenser safe for children?
The hot water button has a child safety lock that must be deactivated before use. Teach children not to touch the hot water area.
Can I use bottled water without filtration?
The dispenser is designed for use with the BRITA filter. Without the filter, water may contain impurities. Always use filtered water for best taste and machine longevity.
How do I replace the drip tray?
Slide out the old drip tray from the front. Insert a new BRITA drip tray (available as a spare part) until it clicks into place.
The dispenser is making loud noises – what should I do?
Check if the unit is level. Air bubbles in the cooling circuit can cause noise; this is normal. If noise is excessive, ensure the filter is properly seated and the tank is full.
User questions about VIVREAU Extra BRITA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water dispenser in PDF format for free! Find your manual VIVREAU Extra - BRITA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VIVREAU Extra by BRITA.
USER MANUAL VIVREAU Extra BRITA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BRITA
Model : VIVREAU Extra
Category : Water dispenser