DW60UNT4X2 - Dishwasher Fisher & Paykel - Free user manual and instructions
Find the device manual for free DW60UNT4X2 Fisher & Paykel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Dishwasher |
| Brand | Fisher & Paykel |
| Model | DW60UNT4X2 |
| Height (mm) | 820 - 920 (adjustable) |
| Width (mm) | 598 |
| Depth (mm) | 573 |
| Weight (kg) | 41 |
| Power Supply (V/Hz) | 220-240 V / 50 Hz |
| Power Consumption (W) | 1900 |
| Energy Rating | A+ |
| Water Consumption (L/cycle) | 10.5 |
| Noise Level (dBA) | 46 |
| Number of Programs | 11 |
| Place Settings | 14 |
| Delay Start (hours) | Up to 24 |
| Control Type | Electronic touch |
| Tub Material | Stainless steel |
| Drying System | Condenser drying |
| Third Rack | Yes |
| Child Lock | Yes |
| Display | LED |
| Installation Type | Fully integrated |
| Manufacturer Warranty | 2 years |
Frequently Asked Questions - DW60UNT4X2 Fisher & Paykel
How do I reset my Fisher & Paykel DW60UNT4X2 dishwasher?
To reset, press and hold the Start/Reset button for 3 seconds during a cycle, or cancel the current program. If issues persist, turn off the power at the circuit breaker for 1 minute and restore.
What does the 'Add Rinse Aid' indicator mean?
The indicator illuminates when the rinse aid dispenser needs refilling. Open the door, turn the cap counterclockwise, and fill until the level indicator is full or use approximately 150ml of rinse aid.
Why is my dishwasher not draining?
Check for blockages in the drain hose or filter. Clean the coarse and fine filters at the bottom of the tub. Ensure the drain hose is not kinked and is properly connected.
How do I clean the filter on this model?
Remove the lower rack, rotate the coarse filter counterclockwise, and lift out both parts. Rinse under running water to remove debris. Reassemble and rotate clockwise to lock.
What cycles are available on the DW60UNT4X2?
This model includes 11 cycles: Heavy, Normal, Light, Rinse, Eco, Auto, Delicate, Glass, Pots & Pans, Quick 30, and Sanitize.
Can I use regular dish soap in my dishwasher?
No, only use dishwasher-specific detergent. Regular dish soap creates excessive suds and may damage the appliance. Use powder, gel, or tabs designed for dishwashers.
How do I adjust the height of the upper rack?
Press the levers on the side runners of the upper rack and lift or lower to one of three positions. Ensure both sides are at the same level for proper clearance.
What does error code E2 mean?
Error E2 indicates a water heating issue. The dishwasher may not be reaching the required temperature. Check the water inlet, ensure hot water supply is at least 40°C, and contact service if persistent.
How do I enable the child lock?
Press and hold the Delay Start and Speed buttons simultaneously for 3 seconds until the lock icon appears on the display. Repeat to unlock.
Why is my dishwasher leaving white spots on dishes?
White spots are typically due to hard water or insufficient rinse aid. Increase the rinse aid dosage setting (from 1 to 6) and add rinse aid. Also, ensure the water softener is set appropriately for your water hardness level.
User questions about DW60UNT4X2 Fisher & Paykel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual DW60UNT4X2 - Fisher & Paykel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DW60UNT4X2 by Fisher & Paykel.
USER MANUAL DW60UNT4X2 Fisher & Paykel
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Fisher & Paykel
Model : DW60UNT4X2
Category : Dishwasher