DW60U2I1 - Dishwasher Fisher & Paykel - Free user manual and instructions
Find the device manual for free DW60U2I1 Fisher & Paykel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Dishwasher |
| Brand | Fisher & Paykel |
| Model | DW60U2I1 |
| Dimensions (H x W x D) | 820 - 870 mm x 598 mm x 570 mm |
| Weight | Approximately 45 kg |
| Power Supply | 220–240 V, 50 Hz, 10 A |
| Energy Efficiency Class | A+ |
| Number of Place Settings | 14 |
| Noise Level | 44 dB(A) |
| Wash Programs | Eco, Auto, Heavy, Normal, Rinse, Rapid, Glass |
| Drying System | Condensation drying with heat exchanger |
| Water Consumption per Cycle | 9–15 L depending on program |
| Energy Consumption per Cycle | 0.85–1.2 kWh |
| Delay Start | Up to 24 hours |
| Child Lock | Yes |
| Flood Protection | Anti-flood system with hose protection |
| Filter System | Self-cleaning microfilter |
| Interior Tub Material | Stainless steel |
| Rinse Aid Dispenser Capacity | Approximately 150 ml |
| Salt Dispenser Capacity | Approximately 1.5 kg |
| Required Water Pressure | 0.05–1.0 MPa (0.5–10 bar) |
| Spare Parts Availability | 10 years after production start |
Frequently Asked Questions - DW60U2I1 Fisher & Paykel
How do I install the dishwasher?
Ensure the water supply, drain, and electrical connections are properly set up. Refer to the installation manual for detailed steps. Use the provided hoses and secure the dishwasher under the countertop.
Do I need to use dishwasher salt?
Yes, dishwasher salt is essential for water softener regeneration. Fill the salt reservoir before first use and when the salt indicator lights up. Use only specific dishwasher salt.
How do I add rinse aid?
Open the rinse aid dispenser cap and fill with rinse aid up to the max level. Adjust the dosage ring (1-6) based on water hardness and spotting. Close the cap securely.
What are the different wash programs?
The DW60U2I1 offers Eco (energy-saving), Auto (soil-sensing), Heavy (pots/pans), Normal (daily), Rinse (quick rinse), Rapid (express), and Glass (delicate) programs. Select according to load and soil level.
What should I do if an error code appears?
Common error codes like E1 (water fill) or E4 (drain) indicate issues. Turn off the dishwasher, check water supply, drain hose, and filters. If persists, contact service. Refer to the manual for code details.
How do I clean the filters?
Turn off the dishwasher. Remove the lower spray arm and unscrew the cylindrical filter. Rinse under running water to remove debris. Clean the flat filter as well. Reassemble and ensure proper seating.
What is the best way to load dishes?
Place plates facing inward, large items on the bottom rack, glasses on the top rack. Avoid overlapping items that block spray arms. Ensure cutlery handles are up for safety and better cleaning.
How can I reduce energy consumption?
Use the Eco program for everyday loads, run full loads only, scrape off food without pre-rinsing, and select the energy-saving dry option. Regularly clean filters and use dishwasher salt and rinse aid.
Why is my dishwasher noisy?
Noise may be due to improper loading (items touching), loose spray arms, or a poorly installed unit. Ensure dishes are stable, spray arms are not obstructed, and the dishwasher is level and securely installed.
How do I connect the water supply?
Use the supplied inlet hose with a nut to connect to a cold water tap (¾ inch). Ensure the water pressure is within 0.05–1.0 MPa. Tighten connections by hand, then turn on water and check for leaks.
User questions about DW60U2I1 Fisher & Paykel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual DW60U2I1 - Fisher & Paykel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DW60U2I1 by Fisher & Paykel.