DTP CrossPoint 82 4K - Uncategorized Extron - Free user manual and instructions
Find the device manual for free DTP CrossPoint 82 4K Extron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 8x2 DTP Matrix Switcher |
| Inputs | 8 DTP/HDMI inputs (4K capable) |
| Outputs | 2 DTP/HDMI outputs (4K capable) |
| Maximum Resolution | 4K @ 60 Hz (4:4:4) |
| Dimensions (H x W x D) | 1.73" x 17.32" x 6.89" (44 x 440 x 175 mm) |
| Weight | 5.3 lbs (2.4 kg) |
| Power Supply | 100-240 VAC, 50/60 Hz, 30W internal |
| Control Interfaces | Ethernet, RS-232, USB, IR |
| Audio Support | Embedded audio pass-through, analog audio de-embedding |
| HDCP Support | HDCP 2.2 compliant |
| Scaling | Built-in scaling on outputs |
| EDID Management | Automatic and manual |
| Mounting | Rack-mountable (1U), with optional feet for desktop |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Storage Temperature | -4°F to 158°F (-20°C to 70°C) |
| Safety | Indoor use only; keep away from liquids and excessive dust |
| Maintenance | Clean exterior with a soft, dry cloth; no solvents |
| Spare Parts | Internal power supply and cooling fan (contact Extron support) |
| Warranty | 3-year parts and labor warranty |
Frequently Asked Questions - DTP CrossPoint 82 4K Extron
How do I connect a source to the DTP CrossPoint 82 4K?
Connect your source (e.g., laptop) via HDMI or DTP to any of the 8 input ports. For DTP sources, use a DTP transmitter. For HDMI, connect directly. Ensure the source is powered on.
What do the DTP ports support?
DTP ports support video (4K up to 60 Hz), audio, control (bidirectional RS-232 and IR), and power over DTP (PoD) for compatible transmitters.
How can I control the switcher?
You can control via web interface (Ethernet), RS-232 serial commands, USB, or IR remote. Use the Extron Global Configurator software for setup.
My output display shows no signal. What should I check?
First, verify the source is active. Check cable connections and ensure the input is selected. Try a different input/output port. If using DTP, confirm the transmitter is powered. Reset the unit if needed.
Does the switcher support audio breakaway?
Yes, the DTP CrossPoint 82 4K supports audio breakaway, allowing independent routing of audio from the video signal.
How do I update the firmware?
Download the latest firmware from the Extron website. Use the Product Configuration Software (PCS) or a USB drive to upload the firmware via the web interface.
Can I use the switcher in a daisy-chain configuration?
The DTP CrossPoint 82 4K is a standalone matrix switcher. For larger systems, you can cascade outputs to other switchers or use Extron's DTP Systems for extended distribution.
What is the maximum cable length for HDMI?
For passive HDMI cables, up to 15 feet (4.6 m) for 4K/60. For longer distances, use active cables or DTP extenders up to 330 feet (100 m) over CAT6a.
How do I reset the unit to factory defaults?
Press and hold the Reset button (located on the rear panel) for 5 seconds while power is on. Release when the front panel LEDs flash. All settings will be cleared.
Where can I find a user manual or additional support?
Download the full manual from Extron's website under product support. You can also contact Extron technical support via phone or online chat for assistance.
User questions about DTP CrossPoint 82 4K Extron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual DTP CrossPoint 82 4K - Extron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DTP CrossPoint 82 4K by Extron.
USER MANUAL DTP CrossPoint 82 4K Extron
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Extron
Model : DTP CrossPoint 82 4K
Category : Uncategorized