BDE 86436X W UK N - Tumble drier INDESIT - Free user manual and instructions
Find the device manual for free BDE 86436X W UK N INDESIT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Condenser Tumble Dryer |
| Brand | Indesit |
| Model | BDE 86436X W UK N |
| Capacity | 8 kg |
| Energy Efficiency Class | B |
| Annual Energy Consumption | 561 kWh |
| Drying Programs | Cotton, Synthetics, Delicates, Mix, Timed Drying, Iron Aid, Anti-Allergy, Eco |
| Drying Levels | Cupboard Dry, Iron Dry, Extra Dry |
| Features | Reverse Tumbling, Anti-Crease, Delay Start (up to 24h), End of Cycle Signal, Child Lock, Filter Cleaning Indicator |
| Water Drainage | Water Tank (manual empty) or Direct Drain Hose |
| Door | Reversible, 180° opening |
| Dimensions (H x W x D) | 85 x 59.5 x 60.5 cm |
| Weight | 38 kg |
| Noise Level (Drying) | 65 dB(A) re 1pW |
| Power Supply | 220-240 V ~ 50 Hz |
| Rated Power | 2100 W |
| Fuse Rating | 10 A |
| Filter | Lint filter in door |
| Condenser Unit | Self-cleaning condenser (rinse with water periodically) |
| Safety Features | Overheating protection, Child lock |
| Spare Parts Availability | Filter, door seal, drum bearing, heating element |
| Installation | Freestanding, vented or condenser operation |
Frequently Asked Questions - BDE 86436X W UK N INDESIT
How do I clean the lint filter?
Open the door and pull the filter located in the bottom of the door opening. Remove lint by hand or with a soft brush. Rinse under running water if needed and dry thoroughly before reinserting. Clean after every cycle.
How often should I empty the water tank?
Empty the water tank after every drying cycle, or when the indicator light is on. Pull out the tank from the bottom left of the machine, empty into a sink, and replace firmly.
Can I install a permanent drain hose?
Yes, you can connect a drain hose (not supplied) to the rear outlet to avoid manual emptying. Ensure the hose is not kinked and drains into a floor drain or sink.
Why is my laundry still damp after a cycle?
Check that the filter and condenser are clean. Ensure you selected the correct drying level and program for the fabric type. Overloading can also cause poor drying. Reduce load size if needed.
How do I clean the condenser?
Locate the condenser unit behind the bottom front panel. Open the cover, rinse with water from the back to remove lint, and ensure it is dry before reinserting. Clean every month.
What does the 'Clean Filter' indicator mean?
It reminds you to clean the lint filter after each cycle. If it remains on after cleaning, check the condenser and ensure filter is properly seated. Ignoring it may reduce drying performance.
Can I delay the start of a cycle?
Yes, use the Delay Start button to set a delay of up to 24 hours. Select your program, press Delay Start, adjust delay time with +/- buttons, then press Start.
What is the recommended load size for cottons?
For optimal drying, load up to 8 kg for cotton programs. For synthetics, reduce to 3 kg. Overloading can cause poor drying and increased wrinkling.
Why is the machine noisy during operation?
Noise can be due to loose coins or buttons in the drum, uneven load distribution, or the machine not being level. Check for foreign objects and ensure the feet are adjusted. Also, some noise is normal for a heat pump or condenser.
How do I activate the child lock?
Press and hold the 'Delay Start' and 'Start/Pause' buttons simultaneously for 3 seconds until the child lock symbol appears on the display. To deactivate, repeat the process.
User questions about BDE 86436X W UK N INDESIT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble drier in PDF format for free! Find your manual BDE 86436X W UK N - INDESIT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BDE 86436X W UK N by INDESIT.