Fog Fury Faze - Effect machine Adj - Free user manual and instructions
Find the device manual for free Fog Fury Faze Adj in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Fog Machine |
| Brand | Adj (American DJ) |
| Model | Fog Fury Faze |
| Dimensions (approx.) | 20 x 20 x 30 cm (7.9 x 7.9 x 11.8 in) |
| Weight (approx.) | 5 kg (11 lbs) |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 1200W |
| Fuse | F 10A / 250V |
| Fluid Capacity | 2.5 L (0.66 gal) |
| Fluid Consumption | Approx. 30 mL/min at full output |
| Warm-up Time | Approx. 2 minutes |
| Maximum Output | 20,000 cubic ft/min (approx.) |
| Control Methods | Manual, DMX512, Wireless Remote (included) |
| DMX Channels | 2 |
| Housing Material | High-impact ABS plastic |
| Heater Type | Stainless steel heat exchanger |
| Nozzle Size | 19 mm (0.75 in) diameter |
| Operating Temperature | 5°C to 40°C (41°F to 104°F) |
| Safety Features | Thermal overload protection, low fluid auto shut-off |
| Included Accessories | Wireless remote, power cord, fluid fill bottle, user manual |
| Recommended Fluid | Adj Fog Fluid (regular or low-lying) |
| Maintenance | Periodic cleaning with distilled water to prevent clogging |
| Spare Parts Available | Pump, heater, fuse, remote, fluid tank |
| Certification | CE, RoHS |
Frequently Asked Questions - Fog Fury Faze Adj
How do I set up the Fog Fury Faze for the first time?
Unpack the machine, place it on a level surface, fill the fluid tank with Adj Fog Fluid, connect the power cord, and wait 2 minutes for warm-up. Use the remote or DMX to output fog.
What type of fog fluid should I use?
Use only Adj brand fog fluid (regular or low-lying). Do not use oil-based or homemade fluids as they may damage the heater.
How do I clean the fog machine?
Run a mixture of distilled water and a small amount of vinegar through the system until the tank is empty. Then let it dry. Repeat every 3 months or after heavy use.
Why is my Fog Fury Faze not producing fog?
Check if the machine is warmed up (indicator should be green/solid), fluid level is sufficient, and the remote is connected properly. Also inspect the fuse if there is no power.
Can I control the fog machine with DMX?
Yes, the unit supports DMX512 protocol. Set the DMX address using the DIP switches (see manual). Use a 3-pin XLR cable to connect to your controller.
What does the low fluid shut-off feature do?
When the fluid level drops too low, the machine automatically turns off the heater to prevent damage. Refill the tank to resume operation.
How long is the warm-up time?
Approximately 2 minutes. The heater indicator will turn from blinking to solid when ready.
Is the remote control included?
Yes, a wireless remote is included. It has a range of about 10 meters and allows quick manual fog bursts.
What size fuse does the Fog Fury Faze use?
It uses a F 10A 250V (5x20mm) fuse. Replace only with the same type.
How do I store the machine after use?
Allow the machine to cool down, empty any remaining fluid, and clean the tank. Store in a dry, dust-free environment between 5°C and 40°C.
User questions about Fog Fury Faze Adj
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Effect machine in PDF format for free! Find your manual Fog Fury Faze - Adj and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Fog Fury Faze by Adj.
USER MANUAL Fog Fury Faze Adj
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Adj
Model : Fog Fury Faze
Category : Effect machine