PLMRA410BT - Receiver Pyle - Free user manual and instructions
Find the device manual for free PLMRA410BT Pyle in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Marine/Vehicle Receiver |
| Brand | Pyle |
| Model | PLMRA410BT |
| Dimensions (W x H x D) | 7.17 x 2.36 x 6.69 inches |
| Weight | 1.5 lbs |
| Power Supply | 12V DC (negative ground) |
| Bluetooth Version | 4.0 |
| Bluetooth Range | Up to 30 feet |
| Radio Bands | AM/FM |
| Max Power Output | 4 x 100 watts (peak) |
| RMS Power Output | 4 x 50 watts |
| Audio Inputs | USB, AUX (3.5mm), SD card |
| Audio Outputs | RCA preamp (4 channels) |
| IP Rating (Water Resistance) | IPX6 (splash resistant) |
| Display | LCD with backlit buttons |
| Remote Control | Included (wired or wireless) |
| Compatible Audio Formats | MP3, WMA, WAV |
| Preset Stations | 30 (18 FM, 12 AM) |
| Equalizer | Preset EQ modes (Rock, Pop, Classic, etc.) |
| Mounting Depth | 4.72 inches |
| Maintenance | Clean with dry cloth; avoid moisture beyond IPX6 rating |
| Safety | Fuse protection (10A included); disconnect battery before installation |
| Spare Parts / Repairability | Contact Pyle support for replacement parts; not user-serviceable internally |
Frequently Asked Questions - PLMRA410BT Pyle
How do I pair my phone via Bluetooth?
Enable Bluetooth on your phone, then press the MODE button on the receiver until 'BT' appears. Select 'PLMRA410BT' from your phone's Bluetooth list. If prompted, enter '0000' as the PIN.
Why is there no sound?
Check that the receiver is turned on and volume is not muted. Ensure speakers are properly connected (impedance 4-8 ohms). Also verify that the source (Bluetooth, USB, radio) is playing audio.
Can I use this receiver in a car?
Yes, it is designed for 12V DC negative ground systems, making it suitable for cars, boats, and other vehicles.
How do I reset the receiver?
Press the RESET button (located on the front panel) with a pen tip for 2 seconds. This restores factory settings.
Does it support USB flash drives?
Yes, you can play MP3/WMA/WAV files from a USB drive up to 32GB (FAT32 format). Insert the drive into the USB port.
How do I set the clock?
Press and hold the DISP button until the time flashes. Use the TUNE +/- buttons to adjust hours and minutes, then press DISP again to save.
What is the maximum speaker power?
The receiver can handle speakers rated up to 100 watts peak (50 watts RMS) per channel. Using higher impedance speakers (4-8 ohms) is recommended.
How do I tune radio stations?
Press MODE to select radio. Use SEEK +/- to scan stations. To store a preset, hold one of the PRESET (1-6) buttons until the display shows 'P1' (for example).
Is the receiver waterproof?
It has an IPX6 rating, meaning it is splash-resistant but not submersible. Avoid direct water jets; protect from heavy rain.
Can I connect an external amplifier?
Yes, it has four RCA preamp outputs (front and rear) for connecting external amplifiers.
User questions about PLMRA410BT Pyle
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual PLMRA410BT - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PLMRA410BT by Pyle.
USER MANUAL PLMRA410BT Pyle
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Pyle
Model : PLMRA410BT
Category : Receiver