G 5008 SCU - Dishwasher MIELE - Free user manual and instructions
Find the device manual for free G 5008 SCU MIELE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Built-in dishwasher |
| Brand | Miele |
| Model | G 5008 SCU |
| Dimensions (H x W x D) | 84.5 x 59.8 x 57.0 cm |
| Weight | 52 kg |
| Place settings | 14 |
| Energy efficiency class | E (EU 2019/2017) |
| Annual energy consumption | 266 kWh/100 cycles |
| Water consumption per cycle | 10 L (Eco program) |
| Noise level | 44 dB(A) re 1 pW |
| Programs | Auto, Eco, Intensive, Gentle, Quick, Rinse & Hold |
| Additional functions | Delay start (1-24 h), ExtraDry, Half load, Short |
| Wash system | Miele AutoHeat, 3 spray arms, cutlery tray |
| Drying system | Condensation drying with heat exchanger |
| Water protection | Waterproof system with double-walled hose |
| Control panel | Electronic buttons and LED display |
| Interior light | Yes |
| Salt and rinse aid indicators | Yes |
| Child lock | Yes |
| Cleaning and maintenance | Clean filters, spray arms, and door seal regularly; run cleaning program monthly |
| Spare parts availability | Genuine Miele parts available for 10+ years |
Frequently Asked Questions - G 5008 SCU MIELE
How do I start a quick wash cycle?
Press the Quick program button, then press Start. The cycle lasts approximately 30-50 minutes depending on the options selected.
What does the 'ExtraDry' function do?
The ExtraDry function increases the final rinse temperature and extends the drying phase to improve drying performance for plastics and difficult items.
How do I clean the filters?
Turn off the dishwasher, remove the lower spray arm, then unscrew and lift out the filter unit. Rinse under running water, scrub with a soft brush, and reassemble. Do this every 2-4 weeks.
Why is there a 'Clean Machine' indicator?
This indicator reminds you to run a maintenance cycle using a dishwasher cleaner or citric acid to remove limescale and grease. Typically every 30 cycles.
How do I adjust the water hardness setting?
Press and hold the Start button until the display shows 'XX', then use the program selector to set the hardness level (e.g., 1-8). Refer to the manual for your local water hardness.
Can I use 3-in-1 detergent tablets?
Yes, the dishwasher is compatible with all-in-one tablets. Ensure the 3-in-1 setting is enabled in the menu if you use them, and adjust salt/rinse aid settings accordingly.
What should I do if the dishwasher leaks?
First, turn off the water supply and unplug the dishwasher. Check the hose connections and door seal. If the leak is from the bottom, it may be a pump or hose issue; contact Miele service.
How do I activate the child lock?
Press and hold the Intensive and Gentle buttons simultaneously for about 3 seconds until the child lock symbol appears on the display. Repeat to deactivate.
Why are dishes not drying completely?
Check that ExtraDry is selected if needed. Ensure rinse aid is filled and the setting is appropriate (1-6). Also, open the door slightly after cycle ends to let steam out.
How do I replace the spray arms?
Grip the center hub of the spray arm and pull upward to detach. For the lower arm, unscrew the retaining nut if present. Insert the new arm and press down until it clicks. Ensure free rotation.
User questions about G 5008 SCU MIELE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual G 5008 SCU - MIELE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. G 5008 SCU by MIELE.
USER MANUAL G 5008 SCU MIELE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MIELE
Model : G 5008 SCU
Category : Dishwasher