M-800A - Receiver LUXMAN - Free user manual and instructions
Find the device manual for free M-800A LUXMAN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stereo Receiver |
| Brand | Luxman |
| Model | M-800A |
| Dimensions (W x H x D) | 440 x 150 x 420 mm |
| Weight | Approximately 15 kg |
| Power Output | 100 W per channel into 8 ohms |
| Total Harmonic Distortion | < 0.02% |
| Frequency Response | 20 Hz - 20 kHz ±0.5 dB |
| Input Sensitivity | Phono: 2.5 mV, Line: 150 mV |
| Signal-to-Noise Ratio | Phono: >80 dB, Line: >100 dB |
| Tuner Bands | FM, AM |
| Inputs | Phono, CD, Tuner, Tape 1, Tape 2, Aux |
| Outputs | Speakers (A, B), Pre-out, Headphone |
| Power Consumption | 350 W |
| Voltage | AC 120 V / 230 V (switchable) |
| Functions | Volume, Balance, Bass, Treble, Loudness, Mute, Mono/Stereo |
| Maintenance | Wipe with a dry, soft cloth. Do not use liquid cleaners. |
| Safety | Do not open the unit. Use only the specified voltage. Keep away from moisture. |
| Spare Parts & Repairability | Contact Luxman authorized service centers for genuine parts. |
| General Information | High-fidelity stereo receiver from Luxman, designed for audiophile performance. |
Frequently Asked Questions - M-800A LUXMAN
What is the power output of the Luxman M-800A?
The Luxman M-800A delivers 100 watts per channel into 8 ohms with low distortion.
Does the M-800A have a built-in phono stage?
Yes, it includes a phono input for turntables with both moving magnet (MM) cartridges.
Can I connect two pairs of speakers?
Yes, the receiver has Speaker A and Speaker B outputs, allowing connection of two pairs.
How do I clean the Luxman M-800A?
Use a soft, dry cloth to wipe the exterior. Avoid liquid cleaners and abrasives.
What is the frequency response of this receiver?
The frequency response is 20 Hz to 20 kHz with a deviation of ±0.5 dB.
Is there a headphone jack?
Yes, a headphone output is located on the front panel for private listening.
What should I do if the receiver does not power on?
Check the power cord and ensure the voltage selector matches your local mains. Verify the fuse is intact.
Can I use the M-800A with a subwoofer?
Yes, connect a subwoofer to the pre-out outputs for an external amplifier.
What type of antenna is needed for the tuner?
For FM, use a 75-ohm coaxial antenna. For AM, a loop antenna is provided.
How do I reset the receiver to factory settings?
There is no factory reset; manual adjustments like tone controls should be set to neutral (12 o'clock).
User questions about M-800A LUXMAN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual M-800A - LUXMAN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. M-800A by LUXMAN.
USER MANUAL M-800A LUXMAN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : LUXMAN
Model : M-800A
Category : Receiver