CL-S700II - Label printer CITIZEN - Free user manual and instructions
Find the device manual for free CL-S700II CITIZEN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Label Printer |
| Print Technology | Direct Thermal / Thermal Transfer |
| Resolution | 203 dpi (8 dots/mm) |
| Print Speed | Up to 6 ips (152 mm/s) |
| Max Print Width | 118 mm (4.65 inches) |
| Max Print Length | 914 mm (36 inches) |
| Dimensions (W x D x H) | 300 x 255 x 410 mm |
| Weight | 14 kg (30.9 lbs) |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Interfaces | USB, Parallel, Serial; optional Ethernet |
| Media Type | Roll-fed labels, continuous or die-cut |
| Max Label Width | 120 mm (4.72 inches) |
| Ribbon Capacity | 300 m (984 ft) max |
| Optional Accessories | Cutter, peeler, Ethernet card, dispenser |
| Maintenance | Clean print head and platen roller with approved pen or alcohol swab |
| Safety Precautions | Use only supplied power cord; keep away from moisture; disconnect before cleaning |
| Spare Parts | Print head, platen roller, cutter blade, ribbon take-up spindle |
| Repairability | User-replaceable parts detailed in manual; other repairs by qualified technician |
Frequently Asked Questions - CL-S700II CITIZEN
How do I load labels into the CL-S700II?
Open the top cover, release the media holder, and place the label roll on the supply spindle. Thread the labels through the print mechanism following the diagram inside the printer. Close the cover and press the Feed button to align.
What type of ribbon does the CL-S700II use for thermal transfer?
It uses a wax, wax/resin, or resin ribbon on a 1-inch core, up to 300 meters long. The ribbon must be at least as wide as the label.
Why is my printer printing blank labels?
Check that the ribbon is installed correctly (for thermal transfer) or that the direct thermal mode is enabled. Also ensure the label side is facing the print head. Clean the print head with a swab.
How do I calibrate the label sensor?
Press the Feed button while powering on the printer. The printer will automatically detect gap and label length. Alternatively, use the Calibrate command in the printer software.
What is the maximum print speed for high-quality output?
For optimal print quality, set the speed to 4 ips (102 mm/s) or lower. The maximum 6 ips may reduce print quality on dense graphics.
How do I clean the print head?
Turn off the printer. Open the cover and allow the print head to cool. Use a lint-free swab moistened with isopropyl alcohol to gently wipe the head. Let dry before closing.
The printer shows a 'Ribbon Out' error but ribbon is installed.
Ensure the ribbon is properly threaded through the ribbon sensor. Check that the ribbon supply spindle is rotating freely. Replace with a new ribbon if wrinkled.
Can I print on non-adhesive paper?
The printer is designed for labels on rolls. Non-adhesive paper may not feed properly. Use fanfold or roll stock specifically for label printers.
How do I change the print resolution?
The CL-S700II has a fixed 203 dpi print head. To change resolution, you would need to replace the print head with a 300 dpi model (not supported). Adjust settings in your label software.
Where can I find the user manual?
The user manual is available for free download on Citizen's website or on notice-facile.com. It contains installation, operation, and troubleshooting instructions.
User questions about CL-S700II CITIZEN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Label printer in PDF format for free! Find your manual CL-S700II - CITIZEN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CL-S700II by CITIZEN.
USER MANUAL CL-S700II CITIZEN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CITIZEN
Model : CL-S700II
Category : Label printer