Kit Hybrid - Boiler SIME - Free user manual and instructions
Find the device manual for free Kit Hybrid SIME in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Hybrid boiler |
| Brand | SIME |
| Model | Kit Hybrid |
| Dimensions (H x W x D) | 700 x 400 x 300 mm |
| Weight | 30 kg |
| Power supply | Gas and electricity |
| Nominal thermal output | 24 kW |
| Main functions | Central heating, domestic hot water production, integrated hydraulic module |
| Maintenance and cleaning | Annual inspection by a certified professional, filter cleaning |
| Safety | Safety devices against overheating, lack of water, and flame extinction |
| Spare parts and repairability | Parts available from SIME dealers, repairability guaranteed |
| General information | Hybrid heating appliance compatible with condensing boiler and heat pump |
Frequently Asked Questions - Kit Hybrid SIME
How to reset the Kit Hybrid boiler?
Press the reset button for 3 seconds until the light flashes. Caution: contact a professional if the fault persists.
What is the ideal temperature for domestic hot water?
55°C is recommended for a good balance between comfort and energy savings. Adjust via the control panel.
How to detect a water leak?
Visually check seals, connections, and the heat exchanger. A drop in pressure indicates a possible leak. Act quickly to avoid damage.
What to do in case of error code E01?
Error code E01 indicates an ignition fault. Check the gas supply and flame. Contact SIME technical service if the problem recurs.
How to program the heating temperature?
Use the wall thermostat or the SIME mobile app to set time slots and temperatures. Program according to your needs to optimize consumption.
What is the recommended water pressure?
The pressure should be between 1 and 1.5 bar when cold. Top up via the filling valve if it drops below 1 bar.
How to drain the boiler?
Turn off power and gas, open radiator bleeds, then the drain valve. Follow the manual for a safe procedure.
How to clean the burner?
Disassemble the burner after turning off the power, clean with a soft non-metallic brush. Reassemble correctly to avoid leaks.
Where to find spare parts?
At authorized SIME dealers or on the official website. Use original parts to ensure compatibility and safety.
How to optimize energy consumption?
Set the heating temperature to 19-20°C, lower it at night, and perform annual maintenance. Hybridization allows using the heat pump to reduce gas consumption.
User questions about Kit Hybrid SIME
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Boiler in PDF format for free! Find your manual Kit Hybrid - SIME and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Kit Hybrid by SIME.
USER MANUAL Kit Hybrid SIME
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SIME
Model : Kit Hybrid
Category : Boiler