Flare - TV signal amplifier SureCall - Free user manual and instructions
Find the device manual for free Flare SureCall in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | TV Signal Amplifier |
| Brand | SureCall |
| Model | Flare |
| Dimensions (L x W x H) | 100 x 60 x 30 mm (3.9 x 2.4 x 1.2 in) |
| Weight | 150 g (5.3 oz) |
| Power Supply | 12V DC, 500 mA (via included adapter) |
| Power Consumption | 6 W |
| Input/Output Connectors | F-type female (75 ohms) |
| Frequency Range | 47–862 MHz (VHF/UHF) |
| Gain | 20 dB typical |
| Noise Figure | < 4 dB |
| Impedance | 75 ohms |
| Number of Outputs | 1 |
| Operating Temperature | -10°C to 40°C (14°F to 104°F) |
| Housing Material | Aluminum alloy |
| Mounting | Wall mountable (brackets included) |
| Cable Length (included) | 1.5 m coaxial cable |
| Functions | Signal amplification, noise reduction, improves weak TV reception |
| Maintenance & Cleaning | Wipe with dry cloth; avoid liquids and direct sunlight |
| Safety | Do not expose to rain or moisture; unplug during storms |
| Spare Parts & Reparability | No user-serviceable parts; contact support for repairs |
| Warranty | 1 year limited warranty |
| Certifications | CE, RoHS |
Frequently Asked Questions - Flare SureCall
How do I install the SureCall Flare TV signal amplifier?
Connect the amplifier between your TV antenna and TV using the included coaxial cables. Ensure the power adapter is plugged into a 12V DC outlet. For best results, place the amplifier as close to the antenna as possible.
What type of antenna is compatible with this amplifier?
The Flare amplifier works with any standard TV antenna using an F-type connector and 75-ohm impedance. It supports both VHF and UHF signals.
Can I use the amplifier outdoors?
No, the Flare is designed for indoor use only. Exposure to rain or moisture may damage the unit. If outdoor installation is required, use a weatherproof enclosure.
Why is my TV signal still weak after installing the amplifier?
Check that all connections are secure and the amplifier is powered. Ensure the antenna is properly positioned. If the signal is very weak or the amplifier is overloaded, try reducing the gain or moving the amplifier closer to the antenna.
Does the amplifier add noise to the signal?
The Flare has a low noise figure (<4 dB), which minimizes added noise. It amplifies the signal without significantly degrading quality, making it suitable for weak signal areas.
Can I connect multiple TVs to one amplifier?
The Flare has a single output, so it supports only one TV directly. To connect multiple TVs, use a signal splitter after the amplifier. Note that splitting may reduce signal strength.
How do I clean and maintain the amplifier?
Unplug the amplifier before cleaning. Wipe the exterior with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners. Keep the unit away from heat sources and dust.
Is the amplifier compatible with digital TV (DVB-T/T2)?
Yes, the Flare works with both analog and digital TV signals, including DVB-T and DVB-T2 standards, across the 47–862 MHz frequency range.
What should I do if the amplifier gets very hot?
The unit may warm up during normal use, but if it becomes excessively hot, unplug it and check for airflow obstruction. Ensure it is placed in a well-ventilated area. If overheating persists, contact support.
Does the amplifier require any special setup for HDTV?
No special setup is needed. The amplifier boosts the entire TV frequency band, including HD channels. Just connect and power on. For best HD reception, use a high-quality antenna and coaxial cable.
User questions about Flare SureCall
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your TV signal amplifier in PDF format for free! Find your manual Flare - SureCall and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Flare by SureCall.
USER MANUAL Flare SureCall
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SureCall
Model : Flare
Category : TV signal amplifier