MCSS41262D3/2-07 - Washing machine CANDY - Free user manual and instructions

Product type	Front-loading washing machine
Brand	Candy
Model	MCSS41262D3/2-07
Washing capacity	6 kg
Maximum spin speed	1200 rpm
Energy class	A+++
Water consumption per cycle	49 L
Noise level (wash/spin)	78 dB / 82 dB
Dimensions (H x W x D)	85 x 60 x 50 cm
Net weight	70 kg
Electrical supply	230 V / 50 Hz / 10 A
Main features	Delayed start, child lock, LED display, cold wash, 30 min quick cycle
Wash programs	Cotton, Synthetic, Delicate, Wool, Quick, Steam, Rinse + Spin, Drain
Steam option	Yes
Drum type	Stainless steel drum
Maintenance and cleaning	Regular cleaning of filter, detergent drawer and door seal
Safety	Child lock, anti-overflow, overheat protection
Spare parts and repairability	Repairability index 8.2/10, parts available for 10 years
Warranty	2 years
General information	User manual included, manual available in French

Frequently Asked Questions - MCSS41262D3/2-07 CANDY

How to install my Candy MCSS41262D3/2-07 washing machine?

Place the appliance on a stable and level floor. Remove the transport bolts. Connect the water inlet and drain hoses. Plug in the power cord. Refer to the manual for detailed diagrams.

What to do if the drum does not turn?

Check that the door is properly closed and the program is not paused. If the problem persists, check the fuse or circuit breaker. Contact after-sales service if necessary.

How to clean the drain filter?

Unplug the appliance. Open the lower left flap, place a basin, unscrew the filter, remove debris, then reassemble. Run a rinse cycle to check for leaks.

What is the maximum capacity of this washing machine?

The capacity is 6 kg for a standard cotton cycle. Do not exceed this load to avoid premature wear.

How to use the delayed start?

Select a program, then press the 'Delayed start' button. Use the arrows to set the desired end time. Press 'Start'. The display will show the countdown.

Why is the water not draining properly?

Check that the drain hose is not kinked or blocked. Clean the drain filter. Ensure the siphon is not obstructed. If the problem persists, the drain hose may be too long.

What does error code 'E04' mean?

Code 'E04' indicates a drainage problem. Check the filter, hose and pump. Refer to the troubleshooting section of the manual for more details.

Can I wash a duvet in this washing machine?

Yes, if the duvet does not exceed 2 kg and is labeled 'machine washable'. Use the 'Duvet' or 'Bed linen' program at low temperature.

How to descale my washing machine?

Use a specific descaling agent for washing machines. Pour it into the detergent drawer and run a 90°C cycle without laundry. Repeat every 3 months depending on water hardness.

Where to find the serial number of the appliance?

The serial number is on the rating plate located at the back or on the side of the door. It consists of 12 alphanumeric characters.

USER MANUAL MCSS41262D3/2-07 CANDY

HATCH-GATE TYPE 1

1.

2.

3.

1.

2.

3.

4.

1.

3.

4.

5.

6.

1.

2.

3.

4.

5.

Remove the pin

6.

7.

8.

9.

DOOR LATCH TYPE 1

TOOLS: PHILLIPS SCREWDRIVER, PLIERS, FLATHEAD SCREWDRIVER

1.

2.

3.

4.

5.

6.

1.

2.

3.

4.

5.

6.

7.

8.

9.

DOOR SEAL

INSTRUCTIONS

DOOR SEAL

1.

2.

3.

4.

5.

6.

7.

8.

9.

1.

2.

3.

COVER TYPE 1

TOOLS: TORX KEY 25

1.

Open the door

2.

3.

1.

Open the door

2.

3.

4.

CURTAIN TYPE 1 TOOLS: TORX KEY 25

1.

Open the door

2.

3.

4.

5.

6.

1.

Open the door

2.

3.

4.

5.

Remove the pin

6.

Remove the door clip

7.

8.

9.

DOOR LOCK TYPE 1

TOOLS: PHILLIPS SCREWDRIVER, PLIERS, FLAT SCREWDRIVER

1.

Open the door

2.

3.

4.

5.

6.

1.

Open the door

2.

3.

4.

5.

6.

7.

8.

9.

DOOR SEAL

TOOLS: TORX KEY, PLIERS, FLAT SCREWDRIVER, TWO 7 TUBULAR WRENCHES

1.

Open the door

2.

3.

4.

5.

Remove the seal

6.

7.

8.

9.

DETERGENT DISPENSER

INSTRUCTIONS

DETERGENT DISPENSER

1.

2.

3.

DOOR

INSTRUCTIONS

DOOR TYPE 1

1.

Open the door

2.

3.

1.

Open the door

2.

3.

4.

HINGE TYPE 1

1.

Open the door

2.

3.

4.

5.

6.

1.

Open the door

2.

3.

4.

5.

6.

7.

8.

9

DOOR LOCK

INSTRUCTIONS

DOOR LOCK TYPE 1

1.

Open the door

2.

3.

4.

5.

6.

1.

Open the door

2.

3.

4.

5.

6.

7.

8.

9.

DOOR SEAL

INSTRUCTIONS

DOOR SEAL

1.

Open the door

2.

3.

4.

5.

6.

7.

8.

9.

DETERGENT DRAWER

INSTRUCTIONS

DETERGENT DRAWER

1.

2.

3.

DETERGENT DRAWER

INSTRUCTIONS

1.

2.

3.

1.

2.

3.

4.

MENTESEΣ TYPE 1

1.

3.

4.

5.

6.

1.

2.

3.

4.

5.

Remove the pin

6.

8.

9.

1.

2.

3.

4.

5.

6.

1.

2.

3.

4.

5.

6.

7.

8.

9.

DOOR INTERLOCK

INSTRUCTIONS

DOOR INTERLOCK

1.

2.

3.

4.

5.

6.

7.

8.

9.

1.

2.

3.

PORTHOLE

INSTRUCTIONS

PORTHOLE TYPE 1

TOOLS: 25 TORX WRENCH

1.

Open the porthole

2.

By using the 25 Torx wrench, remove the screws that fix the hinge to the cabinet

3.

Pull the porthole from the top and remove it

PORTHOLE TYPE 2

TOOLS: 25 TORX WRENCH, FLEXIBLE 7 PIPE WRENCH

1.

Open the porthole

2.

Remove the cover after removing its screw

3.

Remove the screws of the plastic hinge

4.

Pull the porthole from the top and remove it

HINGE

INSTRUCTIONS

HINGE TYPE 1 TOOLS: 25 TORX WRENCH

1.

Open the porthole

2.

Using the 25 pipe wrench, remove the screws that fix the hinge to the cabinet

3.

Pull the porthole from the top and remove it

4.

Remove all the screws of the porthole

5.

Separate the frame from the counter frame

6.

Replace the hinge, taking care not to lose the bushes

HINGE TYPE 2 TOOLS: 25 TORX WRENCH, FLEXIBLE 7 PIPE WRENCH

1.

Open the porthole

2.

Remove the cover after removing its screw.

3.

Remove the screws of the plastic hinge.

4.

Pull the porthole from the top and remove it.

5.

Remove the pin.

6.

Remove the door clip.

7.

Once the strap is removed, detach the flap from the gasket to allow access to the inside of the product.

8.

Remove the external screws from the hinge.

9.

Remove the screws inside the cabinet with the 7 pipe wrench. Remove the hinge

DOOR LOCK

INSTRUCTIONS

DOOR LOCK TYPE 1

TOOLS: CROSS-HEADED SCREWDRIVER, TONG, FLAT SCREWDRIVER

1.

Open the porthole

2.

Use the flat screwdriver for leverage, and remove the external clamp

3.

Once the clamp is removed, detach the flap from the gasket, to allow access to the inside of the product

4.

By using Torx wrench, remove the fixing screws of the door lock, and press its buckle.

5.

Remove the door lock

6.

Disconnect the wiring, in case of "faston", pay attention to do not invert the wiring

DOOR LOCK TYPE 2

TOOLS: CROSS-HEADED SCREWDRIVER, TONG, FLAT SCREWDRIVER

1.

Open the porthole

2.

Use the flat screwdriver for leverage, and remove the external clamp

3.

Once the clamp is removed, detach the flap from the gasket, to allow access to the inside of the product

4.

By using Torx wrench, remove the fixing screws of the door lock

5.

Disassemble the work top and trims

6.

Disassemble the dispenser and bezel

7.

Remove the door lock

8.

Remove the water protection

9.

Replace the door lock by paying attention to mechanical linkage of emergency opening and electrical connections

DOOR'S GASKET

INSTRUCTIONS

DOOR'S GASKET

TOOLS: TORX WRENCH, TONG, FLAT SCREWDRIVER, TWO 7 PIPE WRENCHES

1.

Open the porthole

2.

Use the flat screwdriver for leverage, and remove the external clamp

3.

Once the clamp is removed, detach the flap from the gasket, to allow access to the inside of the product

4.

By using a flat screwdriver, remove the clamp on the tube

5.

Remove the gasket

6.

Place the new gasket, paying attention to the positioning notches

7.

Insert wiring clamp on the tube side

8.

Tighten the clamp flush on the tube by using the tooling

9.

Fit the gasket on the cabinet. Fix the external clamp and tighten it (if needed with tong)

DETERGENT DRAWER

INSTRUCTIONS

DETERGENT DRAWER

1.

Open the detergent drawer

2.

By using two hands, pull it out firmly

3.

Unhook the mask from the detergent drawer, being careful not to break the hooks

FRONT DOOR

INSTRUCTIONS

1.

2.

3.

1.

2.

3.

4.

1.

2.

3.

4.

5.

6.

1.

2.

3.

4.

5.

Remove the pin

6.

7.

8.

9.

DOOR LOCK

INSTRUCTIONS

1.

2.

3.

4.

5.

6.

1.

2.

3.

4.

5.

6.

7.

8.

9.

1.

2.

3.

4.

5.

Remove the packaging

6.

7.

8.

9.

1.

2.

3.

HUBLOT

INSTRUCTIONS

HUBLOT TYPE 1

TOOLS: TORX WRENCH NO. 25

1.

Open the porthole

2.

3.

1.

Open the porthole

2.

3.

4.

HINGE TYPE 1

TOOLS: TORX WRENCH NO. 25

1.

Open the porthole

2.

3.

4.

5.

6.

1.

Open the porthole

2.

3.

4.

5.

Remove the rod

6.

7.

8.

9.

DOOR LOCK TYPE 1

TOOLS: PHILLIPS SCREWDRIVER, PLIERS, FLAT SCREWDRIVER

1.

Open the porthole

2.

3.

4.

5.

6.

1.

Open the porthole

2.

3.

4.

5.

6.

7.

8.

Remove the anti-leak protection

9.

DOOR SEAL

TOOLS: TORX WRENCH, PLIERS, FLAT SCREWDRIVER, TWO ADJUSTABLE WRENCHES NO. 7

1.

Open the porthole

2.

3.

4.

5.

Remove the gasket

6.

7.

8.

9.

DETERGENT DRAWER

INSTRUCTIONS

DETERGENT DRAWER

1.

2.

3.

WINDOW

INSTRUCTIONS

WINDOW TYPE 1 TOOLS: TORX KEY 25

1.

Open the window

2.

Using

Torx key 25

remove the screws that

attach the hinge

to the frame

3.

Pull the window

from the top and

remove it

PROZOR TIP 2 TOOLS: TORX KEY 25, FLEXIBLE TUBE KEY 7

1.

Open the window

2.

Remove the cover after removing its screw

3.

4.

Pull the window from the top part and remove it

HINGE

INSTRUCTIONS

HINGE TYPE 1 TOOLS: TORX KEY 25

1.

Open the window

2.

3.

Pull the window from the top and remove it.

4.

Remove all window screws.

5.

Separate the frame from the subframe.

6.

1.

Open the window.

2.

Remove the cover after removing its screw.

3.

4.

Pull the window from the top and remove it.

5.

Remove the pin.

6.

Remove the door latch

7.

8.

9.

Remove the screws from the inside of the housing using a 7mm socket wrench. Remove the hinge

DOOR LOCK

INSTRUCTIONS

DOOR LOCK TYPE 1

TOOLS: PHILLIPS SCREWDRIVER, PLIERS, FLAT SCREWDRIVER

1.

Open the window

2.

3.

4.

Using a Torx key, remove the door lock retaining screws and press the latch.

5.

Remove the door lock

6.

Disconnect the wiring, and in the case of "faston" connectors, be careful not to reverse the wiring

DOOR LOCK TYPE 2

TOOLS: PHILLIPS SCREWDRIVER, PLIERS, FLAT SCREWDRIVER

1.

Open the window

2.

3.

4.

Using a Torx key, remove the door lock retaining screws

5.

Disassemble the upper working part and trims

6.

Disassemble the dispenser and the frame

7.

Remove the door lock

8.

Remove the water guard

9.

DOOR GASKET

INSTRUCTIONS

DOOR GASKET

TOOLS: TORX WRENCH, PLIERS, SCREWDRIVER, TWO PIPE WRENCHES 7

1.

Open the window

2.

3.

4.

5.

Remove the gasket

6.

7.

8.

Using a tool, tighten the clamp on the pipe

9.

Place the gasket on the housing. Attach the outer clamp and tighten it (using pliers if necessary)

DETERGENT DRAWER

INSTRUCTIONS

DETERGENT DRAWER

1.

Open the detergent drawer

2.

3.

Unhook the mask from the detergent drawer and be careful that the hooks do not break.

OBLò

INSTRUCTIONS

OBLÒ TYPE 1 TOOLS: TORX T25 SCREWDRIVER

1.

Open the porthole

2.

3.

1.

Open the porthole

2.

3.

4.

HINGE TYPE 1

TOOLS: TORX T25 SCREWDRIVER

1.

Open the porthole

2.

3.

4.

5.

6.

1.

Open the porthole

2.

3.

4.

5.

Remove the pin

6.

7.

8.

9.

SAFETY LOCK OF THE DOOR TYPE 1

TOOLS: PHILLIPS SCREWDRIVER, PLIERS, FLAT SCREWDRIVER

1.

Open the porthole

2.

3.

4.

5.

6.

1.

Open the porthole

2.

3.

4.

5.

6.

7.

8.

9.

DOOR GASKET

INSTRUCTIONS

DOOR GASKET

TOOLS: TORX SCREWDRIVER, PLIERS, FLAT SCREWDRIVER, TWO ADJUSTABLE WRENCHES 7

1.

Open the porthole

2.

3.

4.

5.

6.

7.

8.

9.

DETERGENT DRAWER

INSTRUCTIONS

DETERGENT DRAWER

1.

2.

3.

1.

Open the door glass

2.

3.

1.

Open the door glass

2.

3.

4.

HINGE TYPE 1

1.

Open the door glass

2.

3.

4.

5.

6.

1.

Open the door glass

2.

3.

4.

5.

Remove the pin

6.

7.

8.

9.

DOOR LOCK

INSTRUCTIONS

DOOR LOCK TYPE 1

TOOLS: PHILLIPS SCREWDRIVER, PLIERS, FLAT SCREWDRIVER

1.

Open the door glass

2.

3.

4.

5.

6.

1.

Open the door glass

2.

3.

4.

5.

6.

Disassemble the dispenser and the ring

7.

8.

9.

PACKING DOOR

INSTRUCTIONS

PACKING DOOR

TOOLS: TORX WRENCH, PLIERS, FLAT SCREWDRIVER, TWO 7-MM WRENCHES

1.

Open the door glass

2.

3.

4.

5.

6.

7.

8.

9.

DETERGENT DRAWER

INSTRUCTIONS

DETERGENT DRAWER

1.

Open the detergent drawer

2.

3.

WINDOW

INSTRUCTIONS

WINDOW TYPE 1

TOOLS: TORX 25 KEY

1.

Open the window

2.

3.

1.

Open the window

2.

3.

4.

HINGE TYPE 1 TOOLS: TORX KEY 25

1.

Open the window

2.

3.

4.

5.

6.

1.

Open the window

2.

3.

4.

5.

Remove the pin

6.

7.

8.

9.

DOOR LOCK TYPE 1

TOOLS: PHILLIPS SCREWDRIVER, PLIERS, FLAT SCREWDRIVER

1.

Open the window

2.

3.

4.

5.

6.

1.

Open the window

2.

3.

4.

5.

6.

7.

8.

9.

DOOR SEAL

INSTRUCTIONS

DOOR SEAL

TOOLS: TORX KEY, PLIERS, FLAT SCREWDRIVER, TWO PIPE WRENCHES 7

1.

Open the window

2.

3.

4.

5.

Remove the seal

6.

7.

8.

9.

DETERGENT DRAWER

INSTRUCTIONS

DETERGENT DRAWER

1.

2.

3.

DOOR

INSTRUCTIONS

DOOR TYPE 1

TOOLS: TORQUE WRENCH 25

1.

Open the door

2.

Using the torque wrench 25, remove the screws that fix the hinge to the machine

3.

1.

Open the door

2.

3.

4.

HINGE TYPE 1

TOOLS: TORQUE WRENCH 25

1.

Open the door

2.

Using the 25 pipe wrench, remove the screws that fix the hinge to the machine

3.

4.

5.

6.

1.

Open the door

2.

3.

4.

5.

Remove the pin

6.

7.

8.

9.

DOOR LATCH

INSTRUCTIONS

DOOR LATCH TYPE 1

TOOLS: PHILLIPS SCREWDRIVER, PLIERS, FLATHEAD SCREWDRIVER

1.

Open the door

2.

3.

4.

5.

6.

1.

Open the door

2.

3.

4.

5.

6.

7.

8.

9.

DOOR SEAL

INSTRUCTIONS

DOOR SEAL

TOOLS: TORQUE WRENCH, PLIERS, FLAT-HEAD SCREWDRIVER, TWO PIPE WRENCHES 7

1.

Open the door

2.

3.

4.

5.

Remove the seal

6.

7.

8.

9.

DETERGENT DRAWER

INSTRUCTIONS

DETERGENT DRAWER

1.

Open the detergent drawer

2.

3.

WINDOW

INSTRUCTIONS

WINDOW TYPE 1 TOOLS: WRENCH No. 25

1.

2.

3.

1.

2.

3.

4.

BALAMA TIP 1 INSTRUMENTE: CHEIETORX nr. 25

1.

Open the window

2.

3.

4.

5.

Separate the frame from the counter-frame

6.

1.

Open the window

2.

3.

4.

5.

6.

Remove the door hinge

7.

8.

Remove the external screws of the hinge

9.

DOOR CLOSING SYSTEM

INSTRUCTIONS

DOOR CLOSING SYSTEM TYPE 1

TOOLS: PHILLIPS SCREWDRIVER, PLIERS, FLAT-HEAD SCREWDRIVER

1.

Open the window

2.

3.

4.

5.

6.

1.

Open the window

2.

3.

4.

5.

6.

7.

8.

9.

DOOR SEAL

INSTRUCTIONS

DOOR SEAL

TOOLS: TORX WRENCH, PLIERS, FLAT-HEAD SCREWDRIVER, TWO PIPE WRENCHES NO. 7

1.

Open the window

2.

3.

4.

5.

Remove the seal

6.

7.

8.

9.

DETERGENT DRAWER

INSTRUCTIONS

DETERGENT DRAWER

1.

2.

3.

ENTRY DOOR

INSTRUCTIONS

ENTRY DOOR TYPE 1

TOOLS: TORX WRENCH 25

1.

Open the door

2.

Using

Torx key 25

remove the screws,

3.

1.

Open the door

2.

Remove

the cover then,

after you have removed

its screws

3.

4.

HINGE TYPE 1 TOOLS: TORX KEY 25

1.

Open the door

2.

3.

4.

5.

6.

1.

Open the door

2.

Remove the cover after removing its screws

3.

4.

5.

Remove the pin

6.

8.

Remove the external screws from the hinge.

9.

Remove the screws inside the cabinet with a 7 mm socket wrench. Remove the hinge.

DOOR CLOSER

INSTRUCTIONS

DOOR CLOSER TYPE 1

TOOLS: PHILLIPS SCREWDRIVER, PLIERS, FLAT SCREWDRIVER

1.

Open the door.

2.

3.

4.

Use a Torx wrench to remove the mounting screws on the door closer and press its latch.

5.

Remove the door closer.

6.

1.

Open the door

2.

3.

4.

5.

Disassemble the top part and the covers

6.

Disassemble the distributor and the frame

7.

Remove the door lock

8.

9.

DOOR SEAL

INSTRUCTIONS

DOOR SEAL

TOOLS: TORX KEY, PLIERS, FLAT SCREWDRIVER, TWO PIPE WRENCHES 7

1.

Open the door

2.

3.

4.

5.

Remove the seal

6.

Install the new seal, being careful with the installation notches

7.

Set the wiring clip on the pipe side

8.

9.

DETERGENT DRAWER

INSTRUCTIONS

DETERGENT DRAWER

1.

Open the detergent drawer

2.

3.

Remove the detergent drawer front from the hooks, being careful not to break the hooks

DOORS

INSTRUCTIONS

DOOR TYPE 1

TOOLS: TORX 25 WRENCH

1.

Open the door

2.

3.

1.

Open the door

2.

3.

4.

HANGING TYPE 1 TOOL: TORX 25 KEY

1.

Open the door

2.

3.

4.

5.

Separate the frame from the holder

6.

Replace the hinge, being careful not to lose the bushings.

HINGE TYPE 2 TOOLS: TORX 25 KEY, FLEXIBLE, 7 TUBULAR WRENCH

1.

Open the door

2.

3.

4.

5.

Pull out the pin

6.

Pull out the door catch

7.

8.

9.

DOOR LOCK TYPE 1

TOOLS: PHILLIPS SCREWDRIVER, PLIERS, FLAT SCREWDRIVER

1.

Open the door

2.

3.

4.

5.

6.

1.

Open the door

2.

3.

4.

5.

6.

7.

8.

Replace the water protection

9.

DOOR SEAL

INSTRUCTIONS

DOOR SEAL

TOOLS: TORX WRENCH, PLIERS, FLAT SCREWDRIVER, TWO 7 TUBE WRENCHES

1.

Open the door

2.

3.

4.

Using a flat screwdriver, remove the clamp on the tube

5.

Remove the seal

6.

7.

8.

9.

DETERGENT DRAWER

INSTRUCTIONS

DETERGENT DRAWER

1.

Open the detergent drawer

2.

Pull it out firmly with both hands

3.

GLASS DOOR

INSTRUCTIONS

GLASS DOOR TYPE 1

TOOL: 25 ALLEN KEY

1.

Open the glass door

2.

3.

Pull the door from the top and remove it

GLASS DOOR TYPE 2

TOOL: 25 ALLEN KEY, FLEXIBLE PLUMBER'S WRENCH 7

1.

Open the glass door

2.

Remove the cover after unscrewing its screw

3.

4.

Pull the doors from the top and remove them

HINGE

INSTRUCTIONS

HINGE TYPE 1 TOOL: 25 ALLEN KEY

1.

Open the glass doors

2.

3.

Pull the doors from the top and remove them

4.

5.

Separate the frame from the counter-frame

6.

Replace the hinge, being careful not to lose the sleeves

TOOL TYPE 2: 25 ALLEN KEY, FLEXIBLE PLUMBER'S WRENCH 7

1.

Open the glass door

2.

Remove the cover after unscrewing its screw

3.

4.

Pull the door from the top and remove it

5.

Remove the pin

6.

Remove the clip on the door

7.

Once the tape is removed, separate the cover from the gasket to allow access to the interior of the product

8.

Remove the external screws from the hinge

9.

Remove the screws from the inside of the cabinet using a 7mm wrench. Remove the hinge

LOCK

INSTRUCTIONS

LOCK TYPE 1 TOOLS: PHILLIPS SCREWDRIVER, PLIERS, FLATHEAD SCREWDRIVER

1.

Open the glass door

2.

Use a flathead screwdriver as a lever to remove the external clamp

3.

Once the clamp is removed, separate the cover from the gasket to allow access to the interior of the product

4.

Using an Allen key, remove the lock's mounting screws on the door and press its latch.

5.

Remove the lock

6.

Disconnect the wiring; in case of a crimp contact, be careful not to reverse the wiring.

LOCK TYPE 2 TOOLS: PHILLIPS SCREWDRIVER, PLIERS, FLAT SCREWDRIVER

1.

Open the glass door

2.

Use a flat screwdriver as a lever and remove the outer clamp

3.

Once the clamp is removed, separate the cover from the gasket to allow access to the interior of the product

4.

5.

6.

Disassemble the dispenser and frame

7.

Remove the lock

8.

Remove the water protection

9.

Replace the door lock, paying attention to the mechanical emergency opening connection and the electrical connection

DOOR SEAL

INSTRUCTIONS

DOOR SEAL

TOOLS: ALLEN KEY, PLIERS, FLATHEAD SCREWDRIVER, TWO PIPE WRENCHES 7

1.

Open the glass door

2.

Use a flathead screwdriver as a lever and remove the outer clamp

3.

Once the clamp is removed, separate the cover from the seal to allow access to the interior of the product

4.

Using a flathead screwdriver, remove the hose clamp.

5.

Remove the gasket.

6.

Install the new gasket, paying attention to the positioning notches.

7.

Insert the wiring clamp on the hose side.

8.

Using a tool, tighten the clamps on the hose.

9.

Place the gasket on the cabinet. Fix the external clamp and tighten it (with pliers if necessary).

DETERGENT DRAWER

INSTRUCTIONS

DETERGENT DRAWER

1.

Open the detergent drawer

2.

3.

Unhook the detergent drawer cover, being careful not to break the hooks

DRAIN

INSTRUCTIONS

DRAIN TYPE 1

TOOLS: 25 TORX WRENCH

1.

Open the drain

2.

3.

1.

Open the drain

2.

3.

4.

VEHICLES WITH HINGE TYPE 1: 25 TORX KEY

1.

Open the valve

2.

3.

4.

5.

6.

1.

Open the valve

2.

3.

4.

5.

Remove the pin

6.

7.

8.

9.

DOOR LOCK TYPE 1 VEHICLES: PHILLIPS SCREWDRIVER, PLIERS, FLAT SCREWDRIVER

1.

Open the grille

2.

3.

4.

5.

6.

1.

Open the valve

2.

3.

4.

5.

6.

7.

8.

9.

DOOR GASKET

INSTRUCTIONS

DOOR GASKET

TOOLS: TORX WRENCH, PLIERS, FLAT SCREWDRIVER, TWO 7 PIPE WRENCHES

1.

Open the drawer

2.

3.

4.

5.

Remove the container

6.

7.

8.

9.

DETERGENT DRAWER

INSTRUCTIONS

DETERGENT DRAWER

1.

2.

3.