Ci 30×4 - Receiver PEAVEY - Free user manual and instructions
Find the device manual for free Ci 30×4 PEAVEY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Professional Audio Receiver |
| Brand | Peavey |
| Model | Ci 30×4 |
| Dimensions (W x D x H) | 19 x 12 x 3.5 inches (482 x 305 x 89 mm) |
| Weight | 11 lbs (5 kg) |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Power Consumption | 150 W typical |
| Frequency Response | 20 Hz – 20 kHz ±0.5 dB |
| Audio Inputs | 4 balanced XLR, 4 unbalanced RCA |
| Audio Outputs | 4 speaker outputs (binding posts), 2 balanced XLR line out |
| Controls | Volume, EQ, input selector, power switch |
| Protection Features | Overload, short circuit, thermal protection |
| Cooling | Internal fan, variable speed |
| Mounting | 19-inch rack mount, 2U height |
| Operating Temperature | 32°F – 104°F (0°C – 40°C) |
| Cleaning Instructions | Wipe with dry cloth; do not use liquids or sprays |
| Safety Notes | Disconnect power before servicing; do not expose to rain or moisture |
| Spare Parts Availability | Contact Peavey authorized service centers |
| Repairability | Serviceable by qualified technicians; no user-serviceable parts inside |
Frequently Asked Questions - Ci 30×4 PEAVEY
How do I connect my speakers to the Peavey Ci 30×4?
Use the binding post outputs on the rear panel. Ensure the impedance is 4 ohms or higher per channel.
What type of power cord does the Ci 30×4 require?
A standard IEC C13 power cord is used. The unit accepts 100-240 VAC, 50/60 Hz.
Can I use this receiver in a home theater setup?
Yes, but it is primarily designed for professional audio applications. It has balanced inputs for low noise.
Why is my Ci 30×4 not powering on?
Check the power cord connection and the mains fuse. If the fuse is blown, replace with the same rating. If it continues, contact service.
How do I clean the Peavey Ci 30×4?
Use a dry, lint-free cloth to wipe the exterior. Do not use any liquids or aerosol cleaners.
What are the input options for this receiver?
It has 4 XLR inputs and 4 RCA inputs. Use the input selector to choose the source.
Does the Ci 30×4 have a built-in amplifier?
Yes, it is an integrated receiver with four channels of amplification. Each channel delivers up to 150W into 4 ohms.
Can I rack mount this device?
Yes, the Ci 30×4 is designed for 19-inch rack mounting and occupies 2 rack units (2U). Rack ears are included.
What should I do if the receiver overheats?
Ensure proper ventilation around the unit. The fan is variable speed; if it runs at high speed constantly, reduce the load or check airflow.
Where can I find the user manual for the Peavey Ci 30×4?
The manual is available for free download at notice-facile.com in PDF format.
User questions about Ci 30×4 PEAVEY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual Ci 30×4 - PEAVEY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Ci 30×4 by PEAVEY.
USER MANUAL Ci 30×4 PEAVEY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PEAVEY
Model : Ci 30×4
Category : Receiver