Landroid WR150E - Robot mower WORX - Free user manual and instructions
Find the device manual for free Landroid WR150E WORX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Robotic lawn mower |
| Brand | Worx |
| Model | Landroid WR150E |
| Dimensions (without package) | Approx. 72 x 56 x 29 cm |
| Weight | Approx. 15 kg |
| Power source | 20V lithium-ion battery (interchangeable) |
| Battery capacity | 2.0 Ah or 4.0 Ah (depending on version) |
| Cutting system | Floating disc with 3 pivoting blades |
| Cutting width | 18 cm |
| Cutting height range | 20–60 mm (adjustable via central knob) |
| Maximum slope capacity | Up to 35% (19°) |
| Average cutting time per charge | 60–70 minutes |
| Charging time | Approx. 1.5 hours |
| Coverage area per charge | Up to 500 m² (depending on battery) |
| Connectivity | Bluetooth (via Worx Landroid app) |
| Smart features | Rain sensor, lift/tilt sensor, anti-theft PIN code |
| Boundary system | Perimeter wire (included, 150 m) |
| Drive system | Rear wheel drive with differential steering |
| Noise level | < 60 dB(A) |
| Protection class | IPX5 (weather resistant) |
| Recommended lawn size | Up to 500 m² (single zone) |
Frequently Asked Questions - Landroid WR150E WORX
How do I install the perimeter wire for my Worx Landroid WR150E?
Lay the wire around the area you want the mower to operate, securing it with pegs. Connect the wire ends to the charging base terminal. Ensure the wire forms a closed loop and avoid sharp bends.
What battery does the WR150E use and how long does it last?
It uses a 20V lithium-ion battery (WA3520 or WA3525) with typical capacity of 2.0Ah or 4.0Ah. Runtime is about 60 minutes (2.0Ah) or 120 minutes (4.0Ah).
How do I adjust the cutting height on the Landroid WR150E?
Turn the central knob on top of the mower to select one of six cutting heights ranging from 20 mm to 60 mm.
Can the WR150E handle slopes?
Yes, it can operate on slopes up to 35% (19°). For best performance, install the perimeter wire at the top of steep slopes.
Is the WR150E weatherproof?
It has IPX5 protection, meaning it can withstand rain and hose spray. However, it's recommended to store the charging base in a sheltered area.
How do I connect the mower to the Worx Landroid app?
Download the 'Worx Landroid' app from your app store. Turn on the mower, press the Bluetooth button (if available), and follow the app instructions to pair.
What should I do if my mower stops working and shows an error?
Check the display for an error code. Common issues include 'blade blocked' (clean blades), 'lifted' (place on level ground), or 'out of bounds' (check perimeter wire). Refer to the manual for specific codes.
How often should I replace the blades?
Inspect blades every month. Replace them if they are dull, nicked, or damaged. Typically, blades last 2-3 months depending on lawn conditions.
Can I schedule the mower to cut at specific times?
Yes, you can set a weekly schedule via the app or the control panel. The mower can be programmed to start and stop at designated times.
How do I winterize my Landroid WR150E?
Store the mower indoors at room temperature. Charge the battery to about 50% and remove it. Clean the mower, inspect blades, and store the perimeter wire. Do not expose to freezing conditions.
User questions about Landroid WR150E WORX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Robot mower in PDF format for free! Find your manual Landroid WR150E - WORX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Landroid WR150E by WORX.
USER MANUAL Landroid WR150E WORX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : WORX
Model : Landroid WR150E
Category : Robot mower