Anthra W10 - Subwoofer MONITOR AUDIO - Free user manual and instructions
Find the device manual for free Anthra W10 MONITOR AUDIO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Active Subwoofer |
| Brand | Monitor Audio |
| Model | Anthra W10 |
| Driver Size | 10 inches |
| Amplifier Power (RMS) | 400 W |
| Amplifier Power (Peak) | 800 W |
| Frequency Response | 22 Hz – 120 Hz |
| Maximum SPL | 115 dB |
| Dimensions (HxWxD) | 370 x 320 x 370 mm |
| Weight | 14.5 kg |
| Enclosure Type | Sealed |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption (Standby) | < 0.5 W |
| Inputs | Line-level RCA, LFE RCA |
| Outputs | Line-level RCA (pass-through) |
| Controls | Volume, Crossover, Phase (0-180°), Power (Auto/On/Off) |
| Auto Standby | Yes, after 20 minutes of inactivity |
| Grille | Magnetic, removable |
| Cabinet Finish | Matte Black, Satin White |
| Cleaning Instructions | Wipe with dry cloth; avoid liquid cleaners |
| Safety Features | Overload protection, thermal shutdown |
| Spare Parts Availability | Contact Monitor Audio or authorized dealers for replacements (amplifier module, driver) |
| General Information | Designed for high-fidelity bass integration in home theater and stereo systems |
Frequently Asked Questions - Anthra W10 MONITOR AUDIO
What is the recommended crossover frequency for the Anthra W10?
Set the crossover knob to match your main speakers' capabilities, typically between 60 and 80 Hz. Adjust based on room acoustics and personal preference.
How do I connect the subwoofer to my AV receiver?
Use a single RCA cable from the subwoofer pre-out on your receiver to the LFE input on the Anthra W10. For stereo setups, use both left and right line-level inputs.
Should I use the auto stand-by mode?
Yes, auto stand-by saves power. The subwoofer wakes up automatically when a signal is detected. If you experience delays, switch to Always On mode.
Where should I place the Anthra W10 for best performance?
Place it in a corner or along a wall for maximum bass output. Avoid obstructing the driver. Experiment with the phase switch to integrate seamlessly with your speakers.
Can I use the Anthra W10 in a car audio system?
No, this subwoofer is designed for home use only with AC power. Do not use in vehicles as it may cause damage and safety hazards.
What is the power consumption in standby mode?
Standby power consumption is less than 0.5 W, making it energy efficient.
How do I clean the subwoofer?
Use a soft, dry cloth to wipe the cabinet and grille. Do not use any liquid or abrasive cleaners. Remove the grille for thorough cleaning.
Is the subwoofer driver replaceable?
Yes, the driver can be replaced by a qualified technician. Contact Monitor Audio support or an authorized dealer for genuine replacement parts.
What should I do if the subwoofer stops working?
Check power connections, ensure the subwoofer is not in standby (red LED), and verify signal from your source. If still not working, perform a factory reset or contact support.
Can I use multiple Anthra W10 subwoofers in one system?
Yes, you can use multiple subwoofers. Use a Y-splitter from your receiver's subwoofer output, or connect them in a daisy-chain via the line-level outputs. Adjust volume and phase individually.
User questions about Anthra W10 MONITOR AUDIO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual Anthra W10 - MONITOR AUDIO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Anthra W10 by MONITOR AUDIO.
USER MANUAL Anthra W10 MONITOR AUDIO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MONITOR AUDIO
Model : Anthra W10
Category : Subwoofer