DIMPLEX

LA35TUR - Heat pump DIMPLEX - Free user manual and instructions

Find the device manual for free LA35TUR DIMPLEX in PDF.

📄 25 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice DIMPLEX LA35TUR - page 3
Pick your language and provide your email: we'll send you a specifically translated version.
Brand Dimplex
Model LA35TUR
Product Type Air-to-water heat pump
Application Heating and cooling
Refrigerant R32
Heating Capacity (nominal) 11.0 kW
Cooling Capacity (nominal) 9.0 kW
COP (heating, nominal) 4.5
Power Supply 400V/3N/50Hz
Dimensions (Height x Width x Depth) 800 x 1100 x 500 mm
Weight 100 kg
Operating Temperature Range -20°C to +35°C
Sound Pressure Level 55 dB(A) at 1m
Water Flow Rate (nominal) 1.5 m³/h
Max Operating Pressure (water side) 3 bar
Connection Diameter (water) 1 inch (G 1”)
Installation Type Outdoor monobloc
Maintenance Clean air filters annually, check refrigerant pressure, inspect electrical connections
Safety Features Overheat protection, frost protection, high-pressure switch
Spare Parts Availability Compressor, fan motor, expansion valve, control board, sensors
Repairability Modular design with accessible components; serviceable by qualified technician

Frequently Asked Questions - LA35TUR DIMPLEX

How do I reset the Dimplex LA35TUR heat pump?
Turn off the power supply for 5 minutes, then turn it back on. If the error persists, consult the troubleshooting section of the manual.
What is the recommended clearance around the unit?
Ensure at least 500 mm clearance on top, 300 mm on sides, and 1000 mm in front for proper airflow and maintenance access.
Can I use the heat pump during winter?
Yes, the LA35TUR operates down to -20°C. At low temperatures, the defrost cycle activates automatically to prevent ice buildup.
How often should I clean the air filters?
Clean the air filters at least once every 3 months or more frequently in dusty environments. Dirty filters reduce efficiency.
What does error code E4 mean on my Dimplex LA35TUR?
Error E4 indicates a high-pressure fault. Check for blocked airflow, dirty filters, or excessive refrigerant pressure. Contact a technician if it recurs.
Does the LA35TUR come with a backup heater?
Yes, the unit includes an integrated electric backup heater (typically 3-6 kW) to assist during extreme cold weather.
What type of antifreeze should I use?
Use propylene glycol based antifreeze at a concentration of 20-30% for freeze protection down to -15°C. Never use automotive antifreeze.
How do I switch between heating and cooling mode?
Press the mode button on the control panel or remote controller to toggle between heating, cooling, and automatic modes.
The unit is making a loud noise. What could be wrong?
Check for loose panels, debris in the fan, or vibration of the compressor. If noise persists, inspect the fan motor or compressor mounts.
Where can I find the serial number?
The serial number is located on the rating plate attached to the side panel of the outdoor unit. It is required for warranty and technical support.

User questions about LA35TUR DIMPLEX

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Heat pump in PDF format for free! Find your manual LA35TUR - DIMPLEX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LA35TUR by DIMPLEX.

USER MANUAL LA35TUR DIMPLEX

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : DIMPLEX

Model : LA35TUR

Category : Heat pump