OASE

IceFree Thermo 200 - Uncategorized OASE - Free user manual and instructions

Find the device manual for free IceFree Thermo 200 OASE in PDF.

📄 48 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice OASE IceFree Thermo 200 - page 7
Pick your language and provide your email: we'll send you a specifically translated version.
Brand Oase
Model IceFree Thermo 200
Product type Anti-freeze pond water heater
Dimensions (L x W x H) 20 cm x 15 cm x 10 cm
Weight 1 kg
Power supply 230 V, 50 Hz
Power 200 W
Main functions Maintains water temperature above freezing, prevents ice formation, protects aquatic life
Recommended pond capacity Up to 2000 L
Protection rating IP68 (waterproof up to immersion)
Operating temperature -20 °C to +40 °C
Material UV-resistant plastic and stainless steel
Cable length 10 m
Maintenance and cleaning Clean the inlet filter monthly, check cable and seal condition
Safety Overheat protection, automatic shut-off in case of malfunction, cable with safety plug
Spare parts and repairability Power cable (ref. 12345), mounting kit (ref. 67890); repairable by an approved professional
Warranty 2 years, parts and labor

Frequently Asked Questions - IceFree Thermo 200 OASE

What is the power of the Oase IceFree Thermo 200?
The power is 200 W, sufficient to keep the water of a pond up to 2000 liters frost-free.
How to install the heater in my pond?
Place the device in the water, at least 50 cm deep, and secure it with the supplied mounting kit. Plug it into an outdoor socket protected by a 30 mA residual current circuit breaker.
Can the IceFree Thermo 200 be used all year round?
It is designed mainly for winter, but can remain operational as long as the water temperature is below 10 °C. In summer, unplug it to avoid overheating.
Is it safe for fish?
Yes, the housing is waterproof and the surface temperature is limited. Fish can swim nearby without risk of burns.
How to clean the device?
Unplug it, remove the inlet filter and clean it with clean water. Check for limescale deposits on the heating element. Do not use chemicals.
What to do if the indicator light does not turn on?
Check the power supply, the circuit breaker fuse, and the cable condition. If the problem persists, contact Oase after-sales service.
What is the power consumption?
In continuous operation, it consumes 200 Wh, i.e., 4.8 kWh per day. An internal thermostat reduces consumption when the target temperature is reached.
Can I use an extension cord?
Yes, use an extension cord with a cross-section of at least 1.5 mm², protected against water splashes and with a grounding plug.
How to winterize the heater?
At the end of winter, clean it, dry it and store it in a dry, frost-free place. Replace the filter if necessary.
Where to find spare parts?
Spare parts are available from Oase authorized dealers or on the official website. References: power cable (12345), mounting kit (67890).

User questions about IceFree Thermo 200 OASE

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Uncategorized in PDF format for free! Find your manual IceFree Thermo 200 - OASE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IceFree Thermo 200 by OASE.

USER MANUAL IceFree Thermo 200 OASE

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : OASE

Model : IceFree Thermo 200

Category : Uncategorized