IR-112E - Surveillance Camera Edimax - Free user manual and instructions
Find the device manual for free IR-112E Edimax in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Surveillance Camera |
| Model | IR-112E |
| Brand | Edimax |
| Dimensions (W x D x H) | Approx. 6.5 x 6.5 x 11 cm |
| Weight | Approx. 200 g |
| Power Supply | 5V DC, 2A (via micro-USB) |
| Image Sensor | 1/4" CMOS, 1 Megapixel |
| Resolution | 1280 x 720 pixels |
| Lens | Fixed focal length, 3.6 mm |
| Night Vision | IR LEDs, up to 8 m |
| Field of View | 65° diagonal |
| Network Interface | 10/100 Mbps Ethernet, Wi-Fi 802.11 b/g/n |
| Video Compression | H.264, MJPEG |
| Audio | Built-in microphone |
| Motion Detection | Yes, configurable sensitivity |
| Recording | MicroSD card slot (up to 32 GB), FTP, and Cloud |
| Operating Temperature | 0°C to 40°C |
| Mounting | Desktop or wall mount (bracket included) |
| Security | WEP, WPA/WPA2 encryption, password protection |
| Maintenance | Clean lens with dry cloth; keep firmware updated |
| Spare Parts | Power adapter, network cable (included) |
Frequently Asked Questions - IR-112E Edimax
How do I set up the Edimax IR-112E for the first time?
Connect the camera to power via the included adapter and your router via Ethernet. Use the EdiLife app (iOS/Android) to scan the QR code on the camera and follow the on-screen instructions. Alternatively, use the web interface via the camera’s IP address.
Can I use the IR-112E without an Ethernet cable?
Yes, the camera supports Wi-Fi (802.11 b/g/n). During setup, first connect via Ethernet, then configure Wi-Fi in the app or web interface. Once done, you can disconnect the cable.
What is the maximum resolution and frame rate?
The camera streams at 1280x720 (720p) at up to 30 fps. Lower resolutions like 640x480 are also available.
Does the camera support two-way audio?
No, the IR-112E only has a built-in microphone for one-way audio. It can capture sound but does not have a speaker for talking back.
How do I reset the camera to factory defaults?
Locate the reset button on the camera (usually a small pinhole). Press and hold it for about 10 seconds using a paperclip until the camera restarts. The default IP and password will be restored.
Can I view the camera remotely from a computer?
Yes, after setup, you can access the camera via its IP address in a web browser (requires installation of ActiveX or a plug-in). Also, the EdiLife app provides remote viewing on smartphones.
What storage options are available for recording?
You can insert a microSD card (up to 32 GB) for local recording. The camera also supports recording to an FTP server or cloud storage (Edimax Cloud service).
How do I enable motion detection alerts?
In the app or web interface, go to the motion detection settings, enable it, and adjust the sensitivity. You can set it to send email or push notifications when motion is detected.
Is the camera weatherproof for outdoor use?
No, the IR-112E is designed for indoor use only. It has an operating temperature of 0-40°C and is not rated for moisture or dust.
What should I do if I forget my camera's password?
You need to perform a factory reset (see question above). After reset, the default password is often 'admin' or blank. Change it immediately upon login.
User questions about IR-112E Edimax
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Surveillance Camera in PDF format for free! Find your manual IR-112E - Edimax and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IR-112E by Edimax.
USER MANUAL IR-112E Edimax
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Edimax
Model : IR-112E
Category : Surveillance Camera